메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
정민지 (가천대학교) 한수하 (순천향대학교) 유소연 (가천대학교) 이재갑 (한림대학교) 홍진관 (가천대학교)
저널정보
대한설비공학회 설비공학논문집 설비공학논문집 제33권 제2호
발행연도
2021.2
수록면
72 - 79 (8page)
DOI
10.6110/KJACR.2021.33.2.072

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Fast screening centers are being widely utilized in response to outbreaks and epidemics such as the COVID-19 pandemic. Although various types of screening centers exist, those that use negative pressurized medical rooms have the advantage of being operational regardless of the weather. A computational fluid dynamics (CFD) simulation was used in order to determine the required minimum ventilation rate of a sample collection booth, as well as the corresponding pressure difference between a medical examination room and a sample collection room. In order to prevent cross-contamination between the healthcare worker and testee, the sample collection booth exhaust volume flow rate should be higher than 450 CMH when the sample collection room air change rate is 15 air changes per hour. When maintaining the exhaust volume flow rate at these levels, suspending particles decreased to 2% of the total discharged particles within 2 minutes, and particle removal efficiency reached 99.9% in approximately 6 minutes. Discharged particles were dispersed throughout the sample collection room and deposited on the test subject, chair, sidewalls, ceiling, and floor. Therefore, these results show that surface disinfection should be performed after the testee is tested.

목차

Abstract
1. 서론
2. 연구방법
3. 해석 결과
4. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0