메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
Nabilah Afiqah Mohd Radzuan (Universiti Kebangsaan Malaysia) Abu Bakar Sulong (Universiti Kebangsaan Malaysia) Farhana Mohd Foudzi (Universiti Kebangsaan Malaysia) Mohd Yusuf Zakaria (Universiti Kebangsaan Malaysia) Mohd Ikram Ramli (Universiti Kebangsaan Malaysia)
저널정보
한양대학교 세라믹공정연구센터 Journal of Ceramic Processing Research Journal of Ceramic Processing Research 제21권 제6호
발행연도
2020.1
수록면
662 - 666 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
As one of promising biomaterial, hydroxyapatite (HA) is potentially used as an implant component. Yet, to date, HA stillencounter difficulties to be comerciallise due to the easily deteriorate and often fluctuate mechanical performance whichdepends on the manufacturing process. Thus, this study aims to experiment the influence of HA composition and sinteringparameter on the densification, morphological analysis and flexural strength in terms of green parts and sintered HA. The HAparts are fabricated through the powder injection moulding process with the pressure applied between 10 and 12 bar at 150 oC. The HA compositions are varied of 54 wt.%, 55 wt.% and 56 wt.% while the sintering parameter are set at 1,100 oC, 1,200 oCand 1,300 oC. The 56 wt.% of HA parts recorded the densification of 2.13 g/cm3 and 2.95 g/cm3 for both green parts andsintered parts at 1,300 oC. However, as the sintering temperature reduced to 1,200 oC, the densification reached the value of2.9 g/cm3 with the existence of porous structure to allow tissue growth. This finding suggested that the HA parts can be massproduce using powder injection moulding process at 1,200 oC, with a minimum existence of porosity to allow tissue growth inbetween the HA structure.

목차

등록된 정보가 없습니다.

참고문헌 (26)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0