메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
김승준 (한국생산기술연구원) 서준원 (한국생산기술연구원) 양현모 (한국생산기술연구원) 박준관 (한국수력원자력) 김진혁 (한국생산기술연구원)
저널정보
한국유체기계학회 한국유체기계학회 논문집 한국유체기계학회 논문집 제24권 제6호(통권 제129호)
발행연도
2021.12
수록면
12 - 21 (10page)
DOI
10.5293/kfma.2021.24.6.012

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (6)

초록· 키워드

오류제보하기
The pump-turbines as a flexible power generation facility have being operated within the off-design conditions for ensuring the constant power supply to respond to intermittent renewable energy sources such as solar and wind power. Especially, under the low flow rates of the off-design conditions, the complicated internal flows with vortex ropes in the draft tube destabilize the pump-turbine system. Therefore, in order to expand the reliable operating range, it is necessary to understand the internal flow and pressure phenomena under low flow rate conditions of the pump-turbines. In this study, the experiments of a laboratory-scale pump-turbine model were conducted to investigate the vortex characteristics according to the cavitation number at the turbine mode under low flow rate condition. Based on the experimental results, a two-phase (water and vapor) unsteady state RANS analyses were performed using SAS-SST turbulence model. Experimental and numerical investigations showed that the behavior and magnitude of visible vortex rope in the draft tube were in good agreement, and when the visible vortex rope was generated, a relatively higher swirl number and unsteady pressure were shown in the draft tube.

목차

ABSTRACT
1. 서론
2. 펌프수차 제원 및 Laboratory-scale 모델
3. 수치해석 기법
4. 결과
5. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2022-554-000064267