지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 국제구조공학회 Structural Engineering and Mechanics, An Int'l Journal Structural Engineering and Mechanics, An Int'l Journal Vol.70 No.5
- 발행연도
- 2019.1
- 수록면
- 535 - 549 (15page)
이용수
초록· 키워드
오류제보하기
This study aimed to develop a high-order shear deformation theory to predict the free vibration of hybrid cross-ply laminated plates under different boundary conditions. The equations of motion for laminated hybrid rectangular plates are derived and obtained by using Hamilton’s principle. The closed-form solutions of anti-symmetric cross-ply and angle-ply laminates are obtained by using Navier’s solution. To assess the validity of our method, we used the finite element method. Firstly, the analytical and the numerical implementations were validated for an antisymmetric cross-ply square laminated with available results in the literature. Then, the effects of side-to-thickness ratio, aspect ratio, lamination schemes, and material properties on the fundamental frequencies for different combinations of boundary conditions of hybrid composite plates are investigated. The comparison of the analytical solutions with the corresponding finite element simulations shows the good accuracy of the proposed analytical closed form solution in predicting the fundamental frequencies of hybrid cross-ply laminated plates under different boundary conditions.
목차
등록된 정보가 없습니다.
참고문헌 (63)
참고문헌 신청
Z. Abdelhak / 2016 / Analysis of buckling response of functionally graded sandwich plates using a refined shear deformation theory / Wind and Structures, An International Journal 22(3):291~305
Moussa Abualnour / 2018 / A novel quasi-3D trigonometric plate theory for free vibration analysis of advanced composite plates / Composite Structures 184:688~697
Hadj Henni Abdelaziz / 2017 / An efficient hyperbolic shear deformation theory for bending, buckling and free vibration of FGM sandwich plates with various boundary conditions / Steel and Composite Structures, An International Journal 25(6):693~704
Adim Belkacem / 2018 / Mechanical buckling analysis of hybrid laminated composite plates under different boundary conditions / Structural Engineering and Mechanics, An Int＇l Journal 66(6):761~769
Belkacem Adim / 2016 / An efficient and simple higher order shear deformation theory for bending analysis of composite plates under various boundary conditions / Earthquakes and Structures 11(1):63~82
Moussa Abualnour / 2018 / A novel quasi-3D trigonometric plate theory for free vibration analysis of advanced composite plates / Composite Structures 184:688~697
Hadj Henni Abdelaziz / 2017 / An efficient hyperbolic shear deformation theory for bending, buckling and free vibration of FGM sandwich plates with various boundary conditions / Steel and Composite Structures, An International Journal 25(6):693~704
Adim Belkacem / 2018 / Mechanical buckling analysis of hybrid laminated composite plates under different boundary conditions / Structural Engineering and Mechanics, An Int＇l Journal 66(6):761~769
Belkacem Adim / 2016 / An efficient and simple higher order shear deformation theory for bending analysis of composite plates under various boundary conditions / Earthquakes and Structures 11(1):63~82
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Dynamic analysis for anti-symmetric cross-ply and angle-ply laminates for simply supported thick hybrid rectangular plates
Advances in materials research : AMR
2018 .01
-
Free vibrations of laminated composite plates using a novel four variable refined plate theory
Steel and Composite Structures, An International Journal
2017 .01
-
Numerical modeling of hygrothermal effect on the dynamic behavior of hybrid composite plates
Steel and Composite Structures, An International Journal
2021 .01
-
A novel four variable refined plate theory for laminated composite plates
Steel and Composite Structures, An International Journal
2016 .01
-
On the free vibration response of laminated composite plates via FEM
Steel and Composite Structures, An International Journal
2021 .01
-
Thermal flexural analysis of anti-symmetric cross-ply laminated plates using a four variable refined theory
Smart Structures and Systems, An International Journal
2020 .01
-
A computational investigation on flexural response of laminated composite plates using a simple quasi-3D HSDT
Steel and Composite Structures, An International Journal
2021 .12
-
Size-dependent vibration analysis of laminated composite plates
Advances in nano research
2019 .01
-
Static analysis of laminated reinforced composite plates using a simple first-order shear deformation theory
Computers and Concrete, An International Journal
2019 .01
-
An efficient shear deformation theory with stretching effect for bending stress analysis of laminated composite plates
Structural Engineering and Mechanics, An Int＇l Journal
2020 .01
-
Mechanical buckling analysis of hybrid laminated composite plates under different boundary conditions
Structural engineering and mechanics : An international journal
2018 .01
-
A comparative study for bending of cross-ply laminated plates resting on elastic foundations
Smart structures and systems
2015 .01
-
Analysis of laminated composite plates based on different shear deformation plate theories
Structural Engineering and Mechanics, An Int＇l Journal
2020 .01
-
Nonlinear vibration analysis of composite laminated trapezoidal plates
Steel and Composite Structures, An International Journal
2016 .01
-
Bending analysis of anti-symmetric cross-ply laminated plates under nonlinear thermal and mechanical loadings
Steel and Composite Structures, An International Journal
2019 .01
-
Vibration of angle-ply laminated composite circular and annular plates
Steel and Composite Structures, An International Journal
2020 .01
-
Harmonic analysis of moderately thick symmetric cross-ply laminated composite plate using FEM
Advances in computational design
2018 .01
-
Shear buckling analysis of cross-ply laminated plates resting on Pasternak foundation
Structural engineering and mechanics : An international journal
2018 .01
-
Buckling analysis in hybrid cross-ply composite laminates on elastic foundation using the two variable refined plate theory
Structural engineering and mechanics : An international journal
2015 .01
-
Investigation on interlaminar shear stresses in laminated composite beam under thermal and mechanical loading
Steel and Composite Structures, An International Journal
2015 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0