지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 국제구조공학회 Structural Engineering and Mechanics, An Int'l Journal Structural Engineering and Mechanics, An Int'l Journal Vol.72 No.3
- 발행연도
- 2019.1
- 수록면
- 383 - 393 (11page)
이용수
초록· 키워드
오류제보하기
Horizontal openings in reinforced concrete (RC) beams are quite often used to accommodate service pipelines. Several research papers are available in the literature describing their effect. RC beams with vertical openings are commonly used to accommodate service lines in residential buildings in Kuwait. However, there are lack of design guidelines and best practices reported in the literature for RC beams with vertical openings, whereas the detailed guidelines are available for beams with horizontal openings. In the present paper, laboratory experiments are conducted on nine RC beams with and without vertical openings. Parametric study has been carried out using nonlinear finite element analysis (FEA) with changes in the diameter of the opening, various positions of the opening along the length and width of the beam, edge distance, etc. 50 finite element simulations were conducted. The FEA results are verified using the results from the laboratory experiments. The study showed that the load carrying capacity of the beam is reduced by 20% for the RC beam with vertical openings placed near the center of the beam compared to a solid beam without an opening. Significant reduction in load carrying capacity is observed for beams with an opening near the support (≈15%). The overall stiffness of the beam, crack pattern and failure modes were not affected due to the presence of the vertical opening. Furthermore, an artificial neural network (ANN) analysis is carried out using the FEA generated data. The results and observations from the ANN and FEA are in good agreement with experimental results.
목차
등록된 정보가 없습니다.
참고문헌 (19)
참고문헌 신청
Alvanitopoulos P. F. / 2010 / Interdependence between damage indices and ground motion parameters based on Hilbert–Huang transform / Measure. Sci. Technol 21(2):025101~025115
Chen, X. / 2013 / Approximate calculation of nature frequency of partially earth-anchored cable-stayed bridges / Chinese Quarterly Mech 34(4):650~655
Gimsing, N. J. / 2012 / Cable-Supported Bridges: Concept and Design / John Wiley & Sons Ltd
Zhibin Jin / 2016 / Partially Earth-Anchored Cable Bridge: Ultralong-Span System Suitable for Carbon-Fiber-Reinforced Plastic Cables / Journal of Bridge Engineering 21(6):06016003
2007 / JTG D65-01, Guidelines for design of Highway Cable-stayed Bridge / Ministry of Communications
Chen, X. / 2013 / Approximate calculation of nature frequency of partially earth-anchored cable-stayed bridges / Chinese Quarterly Mech 34(4):650~655
Gimsing, N. J. / 2012 / Cable-Supported Bridges: Concept and Design / John Wiley & Sons Ltd
Zhibin Jin / 2016 / Partially Earth-Anchored Cable Bridge: Ultralong-Span System Suitable for Carbon-Fiber-Reinforced Plastic Cables / Journal of Bridge Engineering 21(6):06016003
2007 / JTG D65-01, Guidelines for design of Highway Cable-stayed Bridge / Ministry of Communications
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Residual Strength of Corroded Reinforced Concrete Beams Using an Adaptive Model Based on ANN
International Journal of Concrete Structures and Materials
2015 .06
-
Predicting the shear strength of reinforced concrete beams using Artificial Neural Networks
Computers and Concrete, An International Journal
2019 .01
-
균열 정보와 신경망 모델을 이용한 철근콘크리트 보의 전단 성능 예측 연구
대한건축학회논문집
2023 .10
-
Estimation of ultimate torque capacity of the SFRC beams using ANN
Structural engineering and mechanics : An international journal
2015 .01
-
Numerical simulation of concrete beams reinforced with composite GFRP-Steel bars under three points bending
Structural engineering and mechanics : An international journal
2016 .01
-
Experimental and Numerical Assessment of Reinforced Concrete Beams with Disturbed Depth
International Journal of Concrete Structures and Materials
2019 .11
-
Finite Element Analysis and Calculation Method of Residual Flexural Capacity of Post-fire RC Beams
International Journal of Concrete Structures and Materials
2020 .11
-
Seismic performance of the concrete-encased CFST column to RC beam joints: Analytical study
Steel and Composite Structures, An International Journal
2020 .01
-
Shear Resistance Prediction of Post-fire Reinforced Concrete Beams Using Artificial Neural Network
International Journal of Concrete Structures and Materials
2019 .09
-
AI & REINFORCED CONCRETE STRUCTURES : Artificial Neural Network-based Optimized Design of Reinforced Concrete Structures
대한토목학회지
2023 .11
-
Finite element modelling of GFRP reinforced concrete beams
Computers and Concrete, An International Journal
2020 .01
-
Estimation of ultimate torque capacity of the SFRC beams using ANN
Structural Engineering and Mechanics, An Int＇l Journal
2015 .01
-
Structural damage identification based on genetically trained ANNs in beams
Smart structures and systems
2015 .01
-
전력계통의 저주파진동 억제를 위한 ANN(Artificial Neural Network) 제어기에 관한 연구
대한전기학회 학술대회 논문집
2018 .07
-
A review study of application of artificial intelligence in construction management and composite beams
Steel and Composite Structures, An International Journal
2021 .01
-
Structural damage identification based on genetically trained ANNs in beams
Smart Structures and Systems, An International Journal
2015 .01
-
Experimental, Numerical, and Analytical Investigation of the Reinforced Concrete Hidden and Wide Beams
International Journal of Concrete Structures and Materials
2025 .01
-
Flexural behaviour of GFRP reinforced concrete beams under cyclic loading
Structural Engineering and Mechanics, An Int＇l Journal
2022 .11
-
An efficient and novel strategy for control of cracking, creep and shrinkage effects in steel-concrete composite beams
Structural Engineering and Mechanics, An Int＇l Journal
2019 .01
-
Artificial neural network calculations for a receding contact problem
Computers and Concrete, An International Journal
2020 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0