지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 국제구조공학회 Steel and Composite Structures, An International Journal Steel and Composite Structures, An International Journal Vol.35 No.5
- 발행연도
- 2020.1
- 수록면
- 627 - 634 (8page)
이용수
초록· 키워드
오류제보하기
The past years were marked by an increase in the use of wood waste in civil and mechanical constructions. Date palm waste remains also one of the most solicited renewable and recyclable natural resources in the composition of composite materials. In Algeria, a great amount of this type of plant wastes accumulates every year. In order to make use of this waste, a new wood-epoxy composite material based on date palm petiole particleboard is developed. It makes use of date palm petiole particleboard as reinforcement and epoxy resin as matrix. The size of the particles reinforcement are between 1~3 mm and proportion of reinforcement used is 37%. In this work, experimental and numerical studies are conducted in order to characterize the wood fibre-epoxy plates. Firstly, experimental modal analysis test was carried out to determine Young’s modulus of the elaborated material. Then, in order to validate the results, compression test was conducted. Furthermore, additional information about the shear modulus of this material is obtained by performing an experimental modal analysis to extract the first torsional mode. Moreover, a finite element model is developed using ANSYS software to simulate the vibration behaviour of the plates. The results show a good agreement with the experimental modal analysis, which confirms the values of Young’s modulus and shear modulus.
목차
등록된 정보가 없습니다.
참고문헌 (25)
참고문헌 신청
Mahmoud A. Ahmed / 2016 / Fabrication and characterization of Copper/Silicon Nitride composites / Advances in materials Research 5(3):131~140
Faleh A. Al-Sulaiman / 2003 / Date palm fibre reinforced composite as a new insulating material / International Journal of Energy Research 27(14):1293~1297
Anitescu, C. / 2019 / Artificial neural network methods for the solution of second order boundary value problems / Comput. Mater. Continua 59:345~359
Anyakora, A. N. / 2017 / Effect of fibre loading and treatment on porosity and water absorption correlated with tensile behaviour of oil palm empty fruit bunch fibre reinforced composites / Adv. Mater. Res 6(4):329~341
Francesco Asdrubali / 2015 / A review of unconventional sustainable building insulation materials / Sustainable Materials and Technologies 4:1~17
Faleh A. Al-Sulaiman / 2003 / Date palm fibre reinforced composite as a new insulating material / International Journal of Energy Research 27(14):1293~1297
Anitescu, C. / 2019 / Artificial neural network methods for the solution of second order boundary value problems / Comput. Mater. Continua 59:345~359
Anyakora, A. N. / 2017 / Effect of fibre loading and treatment on porosity and water absorption correlated with tensile behaviour of oil palm empty fruit bunch fibre reinforced composites / Adv. Mater. Res 6(4):329~341
Francesco Asdrubali / 2015 / A review of unconventional sustainable building insulation materials / Sustainable Materials and Technologies 4:1~17
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Epoxy Molding Compound with Low Modulus and Low CTE Properties
한국고분자학회 학술대회 연구논문 초록집
2021 .04
-
Nonlinear large deflection buckling analysis of compression rod with different moduli
Structural engineering and mechanics : An international journal
2015 .01
-
Mode shape identification using response spectrum in experimental modal analysis
Structural monitoring and maintenance
2018 .01
-
흙노반재료의 회복탄성계수(MR) 결정을 위한 반복삼축압축시험법 제시 및 변형계수 상관성 분석
한국철도학회 논문집
2017 .02
-
순환굵은골재를 포함하는 콘크리트의 역학적 특성 및 강도 예측
한국구조물진단유지관리공학회 논문집
2016 .01
-
Analytical and numerical study of temperature stress in the bi-modulus thick cylinder
Structural engineering and mechanics : An international journal
2017 .01
-
Absolute effective elastic constants of composite materials
Structural engineering and mechanics : An international journal
2016 .01
-
삼각배열을 갖는 사각다공평판의 유효탄성계수 평가
한국소음진동공학회 학술대회논문집
2015 .04
-
국내 철도궤도 흙노반 재료의 회복탄성계수(MR)-전단탄성계수(G) 상관성 분석
한국철도학회 학술발표대회논문집
2016 .05
-
Off-stoichiometry Effect on Network Structure and Tensile Properties of an Epoxy Resin
한국고분자학회 학술대회 연구논문 초록집
2021 .10
-
High performance epoxy resins and chemical recycling of epoxy based composites
한국고분자학회 학술대회 연구논문 초록집
2019 .04
-
Morphology and Mechanical Property of Epoxy-Foam Adhesives based on Epoxy Composites for Automotive Application
한국고분자학회 학술대회 연구논문 초록집
2018 .04
-
Electrical Properties of Epoxy Composites with Micro-sized Fillers
Transactions on Electrical and Electronic Materials
2018 .12
-
BiO Epoxy를 함유한 HVDC 옥외용 Epoxy/Micro Silica Composites의 열적, 전기적, 기계적 특성
대한전기학회 학술대회 논문집
2021 .10
-
Nonlinear probabilistic shear panel analysis using advanced sampling techniques
Structural Engineering and Mechanics, An Int＇l Journal
2022 .07
-
얇은 사각형 판 저장 구조물에 대한 동특성해석
한국소음진동공학회 학술대회논문집
2015 .04
-
Effects of environmental temperature and age on the elastic modulus of concrete
Structural Engineering and Mechanics, An Int＇l Journal
2019 .01
-
Shear behaviour of RC beams retrofitted using UHPFRC panels epoxied to the sides
Computers and Concrete, An International Journal
2019 .01
-
Modal해석을 통한 공작기계의 안정성 검토에 관한 연구
한국기계가공학회 춘추계학술대회 논문집
2017 .04
이 논문의 저자 정보
최근 본 자료
댓글(0)
0