지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2021.1
- 수록면
- 1,438 - 1,447 (10page)
이용수
초록· 키워드
오류제보하기
The dynamic compression behavior and microstructure evolution at 400 °C of an extruded Mg–8Gd–4Y–Nd–Zr alloy withdifferent tempers were investigated. The peak-aged samples exhibit the highest compressive strength, followed by as-extrudedsamples and over-aged samples. The highest dynamic compressive strength of 582 MPa was achieved by peak-aged samplecompressed at 1224 s−1. The high strength was attributed to the formation of abundant thermally stable βʹ precipitates andsome dynamic precipitates. The dynamic compressive strength of peak-aged sample and over-aged sample is not sensitiveto strain rates, while that of the as-extruded sample is sensitive to strain rates. The dynamic compressive strength of the asextrudedalloy can reach 535 MPa when compressed at 2024 s−1. The high strength was mainly ascribed to the formationof numerous dynamic precipitates and the work hardening effect caused by dislocations. The cracks are composed of crackthat is 45° to loading direction on the cylindrical surface and crack on the compressed surface. Microstructure observationindicates that the crack was easily propagated along the interface between the adiabatic shear band and matrix, grainboundaries. The equilibrium phase β in over-aged sample was unable to hinder the crack propagation.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Microstructure and Mechanical Properties of Mg–2.0Gd–1.2Y–1.0Zn–0.2Zr Alloy
Metals and Materials International
2021 .01
-
Fabrication of High-Strength Mg?Gd?Nd?Zn?Sn?Zr Alloy via Extrusion and Aging
Metals and Materials International
2021 .10
-
Mg-5Bi-3Al 마그네슘 고속 압출재의 미세조직과 고주기피로 특성
소성·가공
2022 .10
-
Effect of Mn Modification on Microstructure and Mechanical Properties of Magnesium Alloy with Low Gd Content
Metals and Materials International
2021 .01
-
Microstructure and Mechanical Properties of a Highly Alloyed Al–Zn–Mg–Cu–Zr Alloy Under T6I4 and T6R6I4 Agings
Metals and Materials International
2024 .04
-
Effect of Precipitate Characteristics on the Corrosion Behavior of a AZ80 Magnesium Alloy
Metals and Materials International
2021 .09
-
Measurement and Theoretical Calculation Confirm the Improvement of T7651 Aging State Influenced Precipitation Characteristics on Fatigue Crack Propagation Resistance in an Al–Zn–Mg–Cu Alloy
Metals and Materials International
2021 .01
-
Effect of Precipitate State on Mechanical Properties, Corrosion Behavior, and Microstructures of Al–Zn–Mg–Cu Alloy
Metals and Materials International
2018 .01
-
Ultra-High Strength Mg-9Gd-4Y-0.5Zr Alloy with Bi-Modal Structure Processed by Traditional Extrusion
Metals and Materials International
2016 .01
-
듀플렉스 알루미늄 합금의 내식성 분석
한국표면공학회지
2015 .10
-
Modeling the Age-Hardening Process of Aluminum Alloys Containing the Prolate/Oblate Shape Precipitates
Metals and Materials International
2021 .01
-
Effect of Gd on Dynamic Recrystallization Behavior of Magnesium During Hot Compression
Metals and Materials International
2021 .01
-
정밀주조 Hastelloy C-276 합금의 미세조직과 기계적 성질에 미치는 W 함량과 열처리의 영향
한국주조공학회지 (주조)
2017 .01
-
Microstructure Evolution and Dynamic Precipitation Behavior of Mg?10Gd?4Y?1Sm?0.5Zr Alloy During Backward Hot Extrusion
Metals and Materials International
2021 .09
-
Concrete crack rehabilitation using biological enzyme
Computers and Concrete, An International Journal
2017 .01
-
Comparisons of Age Hardening and Precipitation Behavior in 7075 Alloy Under Single and Double-Stage Aging Treatments
Metals and Materials International
2021 .10
-
Investigation of mechanical behaviour of non-persistent jointed blocks under uniaxial compression
Geomechanics & engineering
2018 .01
-
AZ91-0.3Ca-0.2Y 마그네슘 합금 주조재의 시효경화 거동 및 기계적 특성
소성·가공
2023 .08
-
Effect of Zr Addition on Microstructure and Mechanical Properties of a Cast Cu60Fe40 Alloy
Metals and Materials International
2023 .06
-
매립석탄회를 재활용한 표층연약지반 개량용 혼합토의 압축강도 특성 연구
KEPCO Journal on electric power and energy
2019 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0