메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
Elaheh Maleki (Iran University of Industries and Mines) Farzad Shahri (Iranian Research Organization for Science and Technology (IROST)) Masoud Emamy (University of Tehran)
저널정보
대한금속·재료학회 Metals and Materials International Metals and Materials International Vol.27 No.6
발행연도
2021.1
수록면
1,565 - 1,577 (13page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
The present study aimed at investigating the effect of Ca (0–3 wt%) on the microstructure and tensile properties of as-castand as-extruded Mg–Zn alloy, in which tensile tests, X-ray diffraction, SEM, EDX and texture analysis were used to evaluatethese features. Based on the results obtained, it is shown that the average grain size decreased from 305 to 84 μm byadding 3 wt% Ca to the as-cast Mg–Zn alloy. XRD and SEM results reveal that the dominant second phase in the presenceof Ca is Ca2Mg6Zn3which is formed continuously between dendrite arms spacing. It has been observed that the additionof 0.1 wt% Ca, significantly enhanced both UTS and elongation of as-cast alloy. It is found that the size of DRXed grainsdecreases with the increase of Ca (4 μm with 3 wt% Ca addition) after hot-extrusion. Further, it has been observed thatUltimate tensile strength (UTS) and elongation values of extruded alloys containing Ca are enhanced and the best result isobtained for Mg–5Zn–0.1Ca sample. Ultimate tensile strength (UTS) of 351 MPa and elongation percentage of 24% areobtained for Mg–5Zn–0.1Ca extruded alloy.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0