메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
L. Zhang (Nanchang Hangkong University) H. Huang (Nanchang Hangkong University) S. J. Zhang (Nanchang Hangkong University) X. R. Liu (Nanchang Hangkong University)
저널정보
대한금속·재료학회 Metals and Materials International Metals and Materials International Vol.27 No.6
발행연도
2021.1
수록면
1,605 - 1,612 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
This study is undertaken to investigate the microstructure, mechanical properties and tribological behavior of as-castMg100−3xY2xCux (at%, x = 0.5, 1, 1.5 and 2) alloys. The results show that all the alloys had a two-phase structure consistingof α-Mg matrix and 18R long period stacking ordered phase. With increasing Y and Cu contents, the average grainsize of primary α-Mg gradually decreased from 1280 to 146 μm, meanwhile, the volume fraction of long period stackingordered phase rapidly increased from 11.8 to 56.4%. As Y and Cu contents increased, the tensile strength and hardness ofas-cast alloys were gradually enhanced. The yield strength, ultimate tensile strength and hardness of the Mg94Y4Cu2alloywere 188 MPa, 252 MPa and 86.7 HB respectively, which were increased by 144.2%, 78.7% and 20.2% compared with theMg98.5Y1Cu0.5alloy. The friction coefficient and the wear rate of as-cast alloys decreased firstly and then increased as Yand Cu contents increased. The Mg95.5Y3Cu1.5alloy exhibited the lowest friction coefficient and the best wear resistance.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0