지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
이용수
등록된 정보가 없습니다.
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
Development of high hardness and wear resistance composite coatings
한국표면공학회 학술발표회 초록집
2017 .11
Effect of Compositions on the Microstructure and Properties of Plasma Clad NiAl Coating
Metals and Materials International
2016 .01
Standardization of electroless and electroplating Ni-Ceramic composite coatings: Interface, corrosion and tribological behaviors
한국표면공학회 학술발표회 초록집
2021 .12
다층막 ta-C 코팅 적용을 통한 절삭공구의 내마모성 향상
한국표면공학회지
2020 .12
표면코팅 처리된 Al합금의 경도 및 마모특성에 관한 연구
한국기계가공학회지
2024 .09
Laser Cladding Novel NiCrSiFeBW–CeO2 Coating with Both High Wear and Corrosion Resistance
Metals and Materials International
2021 .01
Corrosion and Wear Characteristics of Electroless Ni–P, Ni–P–W and Composite Ni–P–W/Al2O3 Coatings on AZ91 Sheet
Metals and Materials International
2019 .01
CEP 방식에 의한 니켈 / 나노-알루미나의 복합코팅 특성에 관한 연구
한국자동차공학회논문집
2019 .07
Effect of Microstructure Features on the Corrosion Behavior of the Sn‑2.1 wt%Mg Solder Alloy
Electronic Materials Letters
2020 .01
Ni-W 합금도금층의 내마모성 향상을 위한 열처리 및 반응성 Top Coating 기술
한국표면공학회 학술발표회 초록집
2016 .05
그레이트바 내마모 열충격시험
한국생산제조학회 학술발표대회 논문집
2017 .12
High Corrosion Resistance and Low Electrical Contact Resistance of Vanadium-based Chemical Conversion Coating on Mg Alloys
한국표면공학회 학술발표회 초록집
2019 .11
무전해 니켈도금 처리된 강재 부품의 마모 특성에 관한 연구
한국자동차공학회 추계학술대회 및 전시회
2017 .11
최적 고속화염용사법으로 제조된 Diamalloy4006 코팅의 내마모 특성
한국재료학회지
2015 .01
Optical properties improvement of Si doped ta-C protective coatings for satellite solar Cell
한국표면공학회 학술발표회 초록집
2021 .06
Effects of rotation speed on wear behavior of HVOF sprayed Fe-based amorphous coatings
한국트라이볼로지학회 학술대회
2021 .04
Mechanical Properties and Electrochemical Behavior of Electroless Ni?P-AlN Nanocomposite Coating
Metals and Materials International
2022 .06
고온 환경에서 세라믹 코팅 샤프트와 PTFE/PI 복합재의 마찰 및 마모 특성 연구
Tribology and Lubricants
2025 .02
내마모, 내열성 수명연장을 위한 고온산화 특성평가
한국생산제조학회 학술발표대회 논문집
2017 .04
Non-Vacuum Sintering Process of WC/W2C Reinforced Ni-Based Coating on Steel
Metals and Materials International
2016 .01
0