지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 국제구조공학회 Steel and Composite Structures, An International Journal Steel and Composite Structures, An International Journal Vol.28 No.4
- 발행연도
- 2018.1
- 수록면
- 449 - 460 (12page)
이용수
초록· 키워드
오류제보하기
This paper reports the experimental results of three through bolt beam-column connections under pure shear forces using modified push-out tests. The investigated specimens include extended end-plates and six through-bolts connecting square concrete-filled steel tubular column (S-CFST) to steel beams. The main goal of this study is to investigate if and how the mechanical shear connectors, such as steel angles and stud bolts, contribute to the shear transfer mechanisms in the steel-concrete interface of the composite column. The contribution of shear studs and steel angles to improve the shear resistance of steel-concrete interface in through-bolt connections was investigated using tests. The results showed that their contribution is not significant when the beam-column connection is included in the push-out tests. The specimens failed by pure shear of the long bolts, and the ultimate load can be predicted using the shear resistance of the bolts under shear forces. The predicted values of load allowed obtaining a good agreement with the tests results.
목차
등록된 정보가 없습니다.
참고문헌 (24)
참고문헌 신청
ABNT (Brazilian Association of Technical Codes) / 2008 / NBR 8800, Design and execution of steel concrete composite building structures: Procedures / ABNT
Araujo, C.M.S. / 2009 / Study of the shear forces transfer in the connection between steel beams and concrete filled steel tube columns :166
2000 / ASTM E 8M-00, Standard test methods for tension testing of metallic materials (metric) / American Society for Testing and Materials
Beutel, J. / 2001 / Monotonic behaviour of composite column to beam connections / Eng. Struct. 2(3):1152~1161
2002 / BS EN 1993-1-8, Design of steel structures, part 1.8: Design of joints
Araujo, C.M.S. / 2009 / Study of the shear forces transfer in the connection between steel beams and concrete filled steel tube columns :166
2000 / ASTM E 8M-00, Standard test methods for tension testing of metallic materials (metric) / American Society for Testing and Materials
Beutel, J. / 2001 / Monotonic behaviour of composite column to beam connections / Eng. Struct. 2(3):1152~1161
2002 / BS EN 1993-1-8, Design of steel structures, part 1.8: Design of joints
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Static behavior of high strength friction-grip bolt shear connectors in composite beams
Steel and Composite Structures, An International Journal
2022 .02
-
저니켈 듀플렉스계 스테인리스강 1행1열과 1행2열 볼트접합부의 구조거동에 관한 실험적 연구
대한건축학회논문집
2021 .10
-
Experimental study on the hybrid shear connection using headed studs and steel plates
Steel and Composite Structures, An International Journal
2020 .01
-
Interfacial shear resistance of angle shear connectors welded to concrete filled U-shaped CFS beam
Steel and Composite Structures, An International Journal
2022 .05
-
듀플렉스계 스테인리스강 일면전단 볼트접합부의 종국거동에 관한 실험적 연구
대한건축학회 학술발표대회 논문집
2021 .10
-
Structural performance of steel-concrete composite bridges utilising innovative blind bolt shear connectors
Steel and Composite Structures, An International Journal
2021 .01
-
2행 1열 오스테나이트계 스테인리스강(STS304) 볼트접합부의 종전단 및 블록전단 파단내력에 관한 조사
대한건축학회논문집
2023 .12
-
냉간성형 탄소강 이면전단 볼트접합부 최대내력에 관한 실험적 고찰
대한건축학회논문집
2022 .05
-
Shear behavior of a demountable bolted connector in steel-UHPC lightweight composite structures
Structural Engineering and Mechanics, An Int＇l Journal
2022 .03
-
Review of stud shear resistance prediction in steel-concrete composite beams
Steel and Composite Structures, An International Journal
2018 .01
-
Behavior of steel-concrete composite beam using angle shear connectors at fire condition
Steel and Composite Structures, An International Journal
2019 .01
-
Shear behavior of short square tubed steel reinforced concrete columns with high-strength concrete
Steel and Composite Structures, An International Journal
2019 .01
-
Investigation of the effect of bolt diameter and end plate thickness change on bolt column-beam connection
Structural Engineering and Mechanics, An Int＇l Journal
2024 .01
-
탄소강(SS275) 이면전단 2행 2열 볼트접합부의 블록전단파단 메카니즘에 대한 해석적 연구
대한건축학회 학술발표대회 논문집
2019 .10
-
Static and fatigue behavior of through-bolt shear connectors with prefabricated HFRC slabs
Structural Engineering and Mechanics, An Int＇l Journal
2022 .07
-
Influence of shear bolt connections on modular precast steel-concrete composites for track support structures
Steel and Composite Structures, An International Journal
2018 .01
-
Shear behavior of steel reinforced concrete shallow floor beam: Experimental and theoretical study
Steel and Composite Structures, An International Journal
2022 .09
-
Experimental and numerical studies on the shear connectors in steel-concrete composite beams at fire and post fire exposures
Steel and Composite Structures, An International Journal
2021 .01
-
Analyzing shear strength of steel-concrete composite beam with angle connectors at elevated temperature using finite element method
Steel and Composite Structures, An International Journal
2021 .09
-
Reliabilities of distances describing bolt placement for high strength steel connections
Structural Engineering and Mechanics, An Int＇l Journal
2015 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0