지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2016.1
- 수록면
- 714 - 722 (9page)
이용수
이 논문의 연구 히스토리 (2)
- 이 논문의 후속연구가 궁금하신가요?
- 연관 학술논문 또는 학술발표를 통해 보다 발전된 연구결과를 확인하실 수 있습니다.
- 이 논문의 연구 히스토리 확인하기
초록· 키워드
오류제보하기
The effect of the carbon nanotube (CNT) volume fraction on the wear properties of hybrid Mg composites was investigated. The hybrid x vol% CNT + 15 vol% SiCsf-reinforced Mg–5Al–2Si alloy (AS52) matrix composites (x=0, 5 and 10 vol%) were fabricated in two steps involving preform fabrication and squeeze infiltration. The wear rate of the hybrid CNT+SiCsf/AS52 Mg metal matrix composites (MMCs) was evaluated using ballon- disk wear testing, and the roughness was measured using confocal laser 3D microscopy. Additionally, the worn surfaces were examined using high-resolution transmission electron microscopy. The adhesive wear and worn surface roughness of the hybrid CNT+SiCsf/AS52 Mg MMCs were reduced with increasing CNT addition. The CNTs hindered pull-out or cracking of the SiCsfs and matrix deformation. The wear resistance of the hybrid CNT+SiCsf/AS52 Mg MMCs was improved by the CNT additions, causing self-lubricant and strengthening effects compared with the single SiCsf/AS52 Mg MMCs.
목차
등록된 정보가 없습니다.
참고문헌 (25)
참고문헌 신청
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Creep Properties of Squeeze-Infiltrated Carbon Nanotube and Aluminum Borate Whisker Reinforced AS52 Mg Metal Matrix Composites
Metals and Materials International
2018 .01
-
파이어링 상태의 일정 축 각속도에서 엔진베어링의 마모 해석 : Part Ⅱ: 저어널베어링 마모 계산
Tribology and Lubricants
2018 .08
-
Wear Properties of Hybrid ABO+BN+CNT/Al-Sn Alloy Matrix Composites for Engine Bearing Materials
Metals and Materials International
2018 .01
-
상대재와 분위기에 따른 순철의 미끄럼 마멸 기구 분석
소성·가공
2017 .12
-
Studies on High Temperature Wear and Friction Behaviour of AA6061/B4C/hBN Hybrid Composites
Metals and Materials International
2021 .01
-
New anti-wear alloy development & Biomass-caused equipment wear issues & mitigation strategy
대한기계학회 춘추학술대회
2021 .05
-
Influence of Artificial Aging on Mechanical Properties and High Stress Abrasive Wear Behaviour of Al–Mg–Si Alloy
Metals and Materials International
2021 .01
-
Effect of Rolling and Coiling Temperatures on Microstructure and Mechanical Properties of Medium-Carbon Pipeline Steel
Metals and Materials International
2020 .01
-
An Evaluation of Wear in High Load Long Pitch Roller Chain
Journal of the Korean Society for Precision Engineering
2017 .09
-
Wear coefficient determination for micro wear depth prediction of polymer
대한기계학회 춘추학술대회
2022 .05
-
미끄럼 속도변화에 따른 철강재료의 미끄럼 마모거동(중마모 거동에 미치는 연마모 도입시험의 영향)
Tribology and Lubricants
2020 .06
-
유한요소법을 활용한 마모 수치 모델 개발
한국CDE학회 학술발표회 논문집
2016 .01
-
수치적 방법을 이용한 3차원 거친 표면의 마모 해석
Tribology and Lubricants
2020 .08
-
Wear Behaviors of Pure Aluminum and Extruded Aluminum Alloy (AA2024-T4) Under Variable Vertical Loads and Linear Speeds
Metals and Materials International
2017 .01
-
Effect of Compositions on the Microstructure and Properties of Plasma Clad NiAl Coating
Metals and Materials International
2016 .01
-
Microstructure and Wear Resistance of in situ Porous TiO/Cu Composites
Metals and Materials International
2016 .01
-
MMC 서브모듈 간이 시험 장치 개발
대한전기학회 학술대회 논문집
2019 .07
-
마모해석을 위한 고유치해석과 Adaptive Meshing 알고리듬을 이용한 수치해석 비교
Tribology and Lubricants
2020 .10
-
Microstructure and Wear Properties of Cu–La2O3 Composites Prepared by Spark Plasma Sintering
Metals and Materials International
2021 .01
-
Quantitative Evaluation of Tool Wear in Cold Stamping of Ultra-High-Strength Steel Sheets
Metals and Materials International
2023 .02
이 논문의 저자 정보
최근 본 자료
댓글(0)
0