메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
박성수 (부경대학교) 박상찬 (부경대학교) 윤지훈 (부경대학교) 설성훈 (부경대학교) 손창효 (부경대학교) 윤정인 (부경대학교)
저널정보
한국동력기계공학회 동력시스템공학회지 동력시스템공학회지 제25권 제6호
발행연도
2021.12
수록면
66 - 70 (5page)
DOI
10.9726/kspse.2021.25.6.066

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
Demand for low temperatures below -60℃ is increasing in various places. Accordingly, SMR refrigerators are attracting attention as a way to supply them. we recognized the limitation that the study of SMR refrigerators is focused on selecting the composition ratio of mixed refrigerants. However, operating pressure is also an important factor that greatly affects the performance of the refrigerator. In this study, we attempted to understand the performance characteristics of the refrigerator according to the change in operating pressure. The experiment was conducted by changing the compressor discharge pressure to 15bar and 20bar while the compressor suction pressure was fixed to 2.5bar, and the compressor discharge temperature, power consumption, cooling time, refrigeration capacity, and COP were calculated and compared. As a result of the experiment, it was confirmed that when the compressor discharge pressure was high, the compressor discharge temperature increased due to the increase in the compression ratio, and larger power consumption was required. It was confirmed that the cooling time was faster due to a decrease in the heat exchange amount of the intermediate heat exchanger when the compressor discharge pressure was high. It was confirmed that the refrigeration capacity and COP also increased when the compressor discharge pressure was high.

목차

Abstract
1. 서론
2. 실험장치 및 방법
3. 실험 결과 및 고찰
4. 결론
References

참고문헌 (10)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2022-550-000135603