지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2015.1
- 수록면
- 29 - 37 (9page)
이용수
초록· 키워드
오류제보하기
Considering that most sedimentary and metamorphic rocks display some degree of anisotropy in failure strength, the conventional isotropic failure criteria including the Mohr-Coulomb (M-C) and the Hoek-Brown have their limitations in characterizing the strength of these anisotropic rocks. An improved understanding of the orientation dependency of strength in anisotropic rocks can be achieved if a systematic way of establishing a condition at failure in anisotropic rock is provided.
In this research, a general procedure to extend the M-C failure criterion to its anisotropic version is presented in which the friction angle and cohesion are not constant but defined as functions of the relative orientation of physical plane to the principal material triad. In the formulation of the anisotropic failure condition, the directional variation of the strength parameters is described by incorporating a traceless symmetric second-rank fabric tensor that defines the orientation bias in their spatial distribution. Subsequently, the critical plane approach is employed to implement the formulated transversely isotropic M-C failure function in the numerical polyaxial tests on the transversely isotropic rock samples, whereby the polyaxial stress at failure and the corresponding direction of the failure plane are specified by maximizing the failure function with respect to the orientation. A series of numerical polyaxial tests is conducted to investigate how the orientation of weak planes affects the failure behavior of transversely isotropic rocks. The simulation result strongly suggests that the microstructures embedded in the samples and their attitude with respect to the loading direction have much influence on the variation of the polyaxial strength and the orientation of the corresponding failure plane.
목차
등록된 정보가 없습니다.
참고문헌 (24)
참고문헌 신청
Attewell, P. B. / 1974 / Intrinsic shear strength of a brittle, anisotropic rock-I Experimental and mechanical interpretation / International Journal of Rock Mechanics and Mining sciences and Geomechanics Abstracts 11:423~430
Cazacu, O. / 1998 / A new anisotropic failure criterion for transversely isotropic solids / Mechanics of Cohesive-Frictional Materials 3:89~103
Chang, C. / 2000 / A new true triaxial cell for testing mechanical properties of rock and its use to determine rock strength and deformability of Westerly granite / International Journal of Rock Mechanics and Mining Sciences 37:285~296
Colmenares, L. B. / 2002 / A statistical evaluation of intact rock failure criteria constrained by polyaxial test data for five different rocks / International Journal of Rock Mechanics and Mining Sciences 39:695~729
Donath, F. A. / 1964 / State of stress in the Earth’s crust / Elsevier :281~297
Cazacu, O. / 1998 / A new anisotropic failure criterion for transversely isotropic solids / Mechanics of Cohesive-Frictional Materials 3:89~103
Chang, C. / 2000 / A new true triaxial cell for testing mechanical properties of rock and its use to determine rock strength and deformability of Westerly granite / International Journal of Rock Mechanics and Mining Sciences 37:285~296
Colmenares, L. B. / 2002 / A statistical evaluation of intact rock failure criteria constrained by polyaxial test data for five different rocks / International Journal of Rock Mechanics and Mining Sciences 39:695~729
Donath, F. A. / 1964 / State of stress in the Earth’s crust / Elsevier :281~297
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Comparing the generalized Hoek-Brown and Mohr-Coulomb failure criteria for stress analysis on the rocks failure plane
Geomechanics & engineering
2015 .01
-
Cassini 난형곡선을 활용한 횡등방성 암석 파괴함수
터널과 지하공간
2017 .08
-
Limit analysis of 3D rock slope stability with non-linear failure criterion
Geomechanics & engineering
2016 .01
-
횡등방성 암석의 강도 이방성 모사를 위한 강도정수 공간분포함수
터널과 지하공간
2016 .04
-
A review paper about experimental investigations on failure behaviour of non-persistent joint
Geomechanics & engineering
2017 .01
-
Comparison of Hoek-Brown and Mohr-Coulomb failure criterion for deep open coal mine slope stability
Structural Engineering and Mechanics, An Int＇l Journal
2016 .01
-
Reliability analysis of three-dimensional rock slope
Geomechanics & engineering
2018 .01
-
Different light scattering patterns for isotropic and anisotropic particles
한국고분자학회 학술대회 연구논문 초록집
2018 .04
-
The effect of compression load and rock bridge geometry on the shear mechanism of weak plane
Geomechanics & engineering
2017 .01
-
A review of experimental and numerical investigations about crack propagation
Computers and Concrete, An International Journal
2016 .01
-
횡등방성 암석에서 겉보기 탄성정수의 방향성 변화와 탄성정수 제약조건
터널과 지하공간
2023 .06
-
암반의 파괴기준에 따른 제주도 현무암의 강도정수
한국지반공학회논문집
2016 .03
-
Transversely isotropic thick plate with two temperature & GN type-III in frequency domain
Coupled systems mechanics
2019 .01
-
Failure Mechanism and Stability Analysis of Rock Slope: New Insight and Methods
한국지반신소재학회지
2022 .01
-
Rayleigh waves in anisotropic magnetothermoelastic medium
Coupled systems mechanics
2017 .01
-
Dynamic analysis of a transversely isotropic non-classical thin plate
Wind & structures
2017 .01
-
Thermomechanical interactions in a transversely isotropic thermoelastic media with diffusion due to inclined load
Structural Engineering and Mechanics, An Int＇l Journal
2024 .05
-
Bonded-cluster simulation of tool-rock interaction using advanced discrete element method
Structural Engineering and Mechanics, An Int＇l Journal
2019 .01
-
Effect of length scale parameters on transversely isotropic thermoelastic medium using new modified couple stress theory
Structural Engineering and Mechanics, An Int＇l Journal
2020 .01
-
Zero Failure Test에서 신뢰성 시험 계획 수립 방안
한국신뢰성학회 학술대회논문집
2024 .06
이 논문의 저자 정보
최근 본 자료
댓글(0)
0