메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
대한금속·재료학회 Metals and Materials International Metals and Materials International Vol.20 No.2
발행연도
2014.1
수록면
285 - 290 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
A Mg95.5Y3Zn1.5 alloy processed via a two-step processing route of extrusion plus ECAP has been investigated. It was found that the ECAP processed Mg95.5Y3Zn1.5 alloy contained ultrafine grains and exhibitedexcellent mechanical properties. After ECAP, the average grain size of Mg95.5Y3Zn1.5 alloy was refined toabout 300 nm. The highest strengths, with yield strength of 444.6 MPa and ultimate tensile strength of472.7 MPa, were obtained after 1 pass at 623 K. The SAED patterns indicated that the microstructure afterECAP consisted of both high angle and low angle grain boundaries. The fraction of high-angle boundariesincreased with increasing numbers of ECAP passes. The Mg95.5Y3Zn1.5 alloy contained a high volume fractionof X-Mg12ZnY phase due to high yttrium and zinc addition. And, it accelerated the growth and coalescenceof cracks during tensile testing, resulting in premature fracture and lower elongation of alloy.

목차

등록된 정보가 없습니다.

참고문헌 (18)

참고문헌 신청

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0