메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
대한금속·재료학회 Metals and Materials International Metals and Materials International Vol.17 No.4
발행연도
2011.1
수록면
607 - 611 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
The wettability of dual phase steels by liquid Zn-0.23 wt.%Al at 450 °C (723 K) was investigated using the dispensed sessile drop method. Dual phase steels of six different Si contents (0 wt.%, 0.12 wt.%, 0.18wt.%, 0.3 wt.%, 0.5 wt.%, and 1.0 wt.%) annealed in a 15 %H2-N2 gas atmosphere at a dew point of −60 °C (213 K) were examined. As the Si content increased from 0 wt.% to 0.5 wt.%, the wettability worsened. However, as the Si content increased to 1.0 wt.%, the wettability improved to be better than that of the 0.3wt.%Si steel. Based on the surface oxide analysis results using SEM, FT-IR, and TEM analyses, the effect of the surface oxide type on the wettability is discussed. Although the morphology of the nanometer-sized surface oxides did not change, the surface oxides changed from MnO to Mn_2SiO_4 to MnSiO_3 and then to SiO_2 as the Si content increased. After comparison of the present results with the wettability of pure oxides,it was concluded that the coating property of the dual phase high strength steel was more closely related to the type of surface oxide.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0