지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2005.1
- 수록면
- 183 - 194 (12page)
이용수
이 논문의 연구 히스토리 (4)
2015
2007
- 이 논문의 후속연구가 궁금하신가요?
- 연관 학술논문 또는 학술발표를 통해 보다 발전된 연구결과를 확인하실 수 있습니다.
- 이 논문의 연구 히스토리 확인하기
초록· 키워드
오류제보하기
The amount of ASR-SD(Automobile Shredder Residue-Shredder Dust) produced from end-of-life vehicles is above 20% of total weight of a new automobile. Many attempts have been made to reduce the final volume to be disposed of since the recycling rate will be enforced to be less than 5% by 2015 in most advanced countries such as Germany, France, England, Japan and Netherlands. ASR-SD could be recycled to energy by thermal treatment process such as pyrolysis and gasification because of the high content of combustible materials with high calorific values. Characteristics and composition of ASR-SD were determined to understand such proper treatment. For pyrolysis products including gas, tar and char, yield rates through pyrolysis experiment at different temperatures ranged from 400 to 800 with a laboratory-scale reactor were estimated, and characteristics of them were investigated. At 600 , tar and gas show high production ratio. In produced gas at 800℃, concentrations of H2 and CH4 were reaching up to 11% and 33.5%, respectively. Produced tar contained negligible moisture content and it's calorific value was around 9,000kcal/kg, which was sufficient to use as a liquid fuel. As temperature increased, pore volume at surface of char is increased. Using obtained results the pyrolysis products could be investigated for further utilization.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청이 논문의 저자 정보
최근 본 자료
댓글(0)
0