지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2022.2
- 수록면
- 100 - 109 (10page)
- DOI
- 10.6110/KJACR.2022.34.2.100
이용수
초록· 키워드
오류제보하기
The amount of aerosol retention in the pipe of the test facility was analytically evaluated in the steam generator tube rupture experimental facility installed in the Korea Atomic Energy Research Institute (KAERI). The amount of aerosol removal in the pipe can be varied greatly depending on the thermo-hydraulic conditions (gas velocity, pressure, temperature, etc.) of the gas containing the aerosol. It is also known that the geometry of the pipes, such as length, curvature, and diameter can be important factors in determining the amount of aerosol retention inside the pipe. Thus, sensitivity calculations were performed on various uncertain variables to identify a decontamination factor of the test facility. In this study, the PLC (Particle Loss Calculator) program was used to evaluate the decontamination factor of aerosol inside the pipes. The calculation results were also compared to the experimental data obtained from the KAERI. It was found that the analysis results underestimate the decontamination factor due to the limitation of the models considered in the PLC program.
목차
Abstract
1. 연구배경 및 목적
2. 연구방법
3. 결과 및 분석
4. 결론
References
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Key Findings from the ARTIST Project on Aerosol Retention in a Dry Steam Generator
Nuclear Engineering and Technology
2016 .01
-
Radiological Effect of Aerosols From Decommissioning and Decontamination
한국방사성폐기물학회 학술대회
2018 .01
-
Investigations on aerosols transport over micro- and macro-scale settings of West Africa
Environmental Engineering Research
2017 .03
-
System for Measuring Characteristic of Aerosol From Metal Cutting
한국방사성폐기물학회 학술대회
2018 .01
-
Effective Decontamination Treatment Process of Steam Generator
한국방사성폐기물학회 학술대회
2018 .01
-
건물 내부 공기 질 개선 위한 에어로졸 포집 기술 개발
대한설비공학회 학술발표대회논문집
2019 .06
-
Validation of the correlation-based aerosol model in the ISFRA sodium-cooled fast reactor safety analysis code
Nuclear Engineering and Technology
2021 .12
-
미세먼지 관측 임무를 위한 큐브위성 상세 설계 및 분석
한국항공우주학회 학술발표회 초록집
2020 .11
-
Attachment Behavior of Fission Products to Solution Aerosol
방사선방어학회지
2016 .01
-
The detection characteristics of Bio-aerosol Detection System (BDS) equipped with 405 nm laser diode
한국생물공학회 학술대회
2017 .10
-
새로운 형태의 에어로졸 분류 장치 개발 및 성능평가
한국생산제조학회 학술발표대회 논문집
2018 .05
-
Laser decontamination for radioactive contaminated metal surface: A review
Nuclear Engineering and Technology
2023 .01
-
Theoretical simulation on evolution of suspended sodium combustion aerosols characteristics in a closed chamber
Nuclear Engineering and Technology
2022 .06
-
미세먼지 관측 임무를 위한 큐브위성 임무 및 시스템의 예비설계
한국항공우주학회 학술발표회 초록집
2020 .07
-
필터 종류에 따른 실내 입자 농도 감소율에 관한 연구
대한기계학회 춘추학술대회
2016 .12
-
Synthesis and Characterization of TiO<sub>2</sub>, Cu<sub>2</sub>O and Al<sub>2</sub>O<sub>3</sub> Aerosol Nanoparticles Produced by the Multi-Spark Discharge Generator
한국재료학회지
2016 .01
-
Real-time measurements and modeling of sodium combustion aerosol dynamics in test chamber to improve the evaluation of SFR containment aerosol behaviour
Nuclear Engineering and Technology
2024 .09
-
에어로졸 샘플링 프로브의 크기에 따른 흡인효율 변화에 관한 연구
한국기계가공학회 춘추계학술대회 논문집
2018 .04
-
Optimization of the Sensitivity of a Bio-aerosol Detector by Analyzing Climatic Particle Characteristics in South Korea
한국생물공학회 학술대회
2022 .09
-
Size Measurement of Radioactive Aerosol Particles in Intense Radiation Fields Using Wire Screens and Imaging Plates
방사선방어학회지
2016 .01
이 논문의 저자 정보
이 논문과 함께 이용한 논문
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2022-553-000212640