메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
이준헌 (홍익대학교) 김관주 (홍익대학교)
저널정보
Korean Society for Precision Engineering Journal of the Korean Society for Precision Engineering Journal of the Korean Society for Precision Engineering Vol.39 No.2
발행연도
2022.2
수록면
115 - 122 (8page)
DOI
10.7736/JKSPE.021.106

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The purpose of this study was to investigate the excitation force that generates the vibration of the reduction gear case for railroad vehicles. This excitation force is difficult to measure directly. The inverse stiffness method was used using the acceleration response measured in the experiment and the vibration response function derived from the finite element analysis. It was assumed that the excitation force acting on the reduction gear operates in the X, Y, and Z directions for each bearing, and a total of 12 excitation forces were investigated. When deriving the excitation force, singular value decomposition was applied to the vibration response function to increase the accuracy of the result. The results of the excitation force according to the number of degrees of freedom of the response were compared. Additionally, the magnitude of the estimated excitation force according to the singular value category used was compared, and it was confirmed that a too low singular value indicates a different excitation force.

목차

1. 서론
2. 가진력 복원 방법
3. 가진력 추정 방법
4. 결론
REFERENCES

참고문헌 (8)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2022-555-000211163