지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 한국진공학회(ASCT) Applied Science and Convergence Technology Applied Science and Convergence Technology Vol.30 No.6
- 발행연도
- 2021.11
- 수록면
- 159 - 162 (4page)
이용수
초록· 키워드
오류제보하기
The use of tiny, micro-powered electronic devices in indoor environments is increasing daily. The demand for high-performing organic photovoltaics (OPVs) to power these devices has been rapidly growing because OPVs have favorable absorption properties for indoor environments, excellent mechanical flexibility, and other advantageous attributes. Recently, inexpensive, less acidic, and water-processable polyaniline:poly (4-styrenesulfonic acid) (PANI:PSS) was shown to deliver remarkably high performance as the hole transport layer (HTL) in an indoor OPV device with poly(3-hexylthiophene): indene-C60 bisadduct as the active layer. However, PANI:PSS has not been tested in combination with other active materials, although its universal applicability is of key importance for its commercialization. Thus, we tested the potentiality of using PANI:PSS as the HTL of a highly suitable active material, poly[[4,8-bis[(2-ethylhexyl)oxy]benzo[1,2-b:4,5-b’]dithiophene-2,6-diyl][3-fluoro-2-[(2-ethylhexyl-l)carbonyl]thieno[3,4-b]thiophendiyl]:phenyl-C70-butyric acid methyl ester (PTB7:PC<SUB>70</SUB>BM) in an OPV device under an LED lamp. The results reveal that the OPV device based on the PANI:PSS HTL and PTB7:PC<SUB>70</SUB>BM as the active material has high efficiency (11.80%) and a maximum power density of 42.5 𝜇W/cm² under a 1,000 lx LED.
목차
ABSTRACT
1. Introduction
2. Experimental details
3. Results and discussion
4. Conclusions
References
참고문헌 (20)
참고문헌 신청
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Device Design Rules for High-Power Indoor Solar Cell
한국진공학회 학술발표회초록집
2019 .08
-
Appropriate Electron Transport Layer for Highly Efficient Organic Photovoltaics under Low Intensity Light Conditions
한국진공학회 학술발표회초록집
2020 .08
-
Appropriate Electron Transport Layer for High Power Conversion Efficiency in Indoor Light Applications
한국진공학회 학술발표회초록집
2020 .02
-
Hybrid thin-film solar cells using a solution-processed hole-blocking layer
한국진공학회 학술발표회초록집
2015 .02
-
Advanced Vacuum Technology and the Present Thin Film Photovoltaic Industry
한국진공학회 학술발표회초록집
2019 .08
-
Vacuum deposited small molecule and perovskite solar cells
한국진공학회 학술발표회초록집
2016 .08
-
Simulation Study about Vacuum Technology for Vacuum Tube Train
한국진공학회 학술발표회초록집
2018 .02
-
실내 저조도용 고출력 페로브스카이트 태양 전지 소자 설계 및 구동 원리
진공이야기
2020 .06
-
Trend in Japanese vacuum industry
한국진공학회 학술발표회초록집
2016 .08
-
Vacuum characteristics of Warm section vacuum chamber with wire scanner
한국진공학회 학술발표회초록집
2020 .02
-
Characterization of high vacuum standard system using the dynamic expansion method
한국진공학회 학술발표회초록집
2017 .02
-
Computational Design of the Hole Transport Layers in Perovskite Solar Cells
한국진공학회 학술발표회초록집
2018 .02
-
Considerations for safe operation in vacuum systems
한국진공학회 학술발표회초록집
2016 .08
-
Towards Thermally Stable Tandem Organic Solar Cells
한국진공학회 학술발표회초록집
2016 .02
-
ESS vacuum system status
한국진공학회 학술발표회초록집
2016 .08
-
Performance of the TPS vacuum system
한국진공학회 학술발표회초록집
2016 .08
-
Visible particles of vacuum
한국진공학회 학술발표회초록집
2016 .08
-
Improvement of hole transport from p-Si with interfacial layers for silicon solar cells
한국진공학회 학술발표회초록집
2016 .02
-
Vacuum Test of Cavity with Liquid Nitrogen
Applied Science and Convergence Technology
2015 .09
-
Experimental study of the effective pumping speed of dry vacuum pump due to complex vacuum exhaust line
한국진공학회 학술발표회초록집
2016 .08
이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2022-420-000199917