메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
박종욱 (Dongyang Mirae University) 김한 (Dongyang Mirae University)
저널정보
한국생산제조학회 한국생산제조학회지 한국생산제조학회지 Vol.31 No.1
발행연도
2022.2
수록면
41 - 47 (7page)
DOI
10.7735/ksmte.2022.31.1.41

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
In this paper, a novel hybrid micro texturing method that combines laser beam machining and electrochemical etching was suggested. In this new machining process, tungsten anisotropic micro channel that was used for directional locking was fabricated. First, laser beam machining on a tungsten workpiece with tilted condition was adopted to rough texturing. Subsequently, a recast layer with tungsten oxide was generated that covered the original anisotropic channel shape, causing a low surface quality. For this reason, electrochemical etching was carried out to elute the recast layer into electrolyte. Moreover, EDS analysis that observed the atomic distribution of textured micro channel was performed to verify the principle of the suggested hybrid process. In the finally fabricated anisotropic micro channel after the hybrid texturing process, the interlocking force (maximum 133.44 N, 5×5 mm²) was measured using the load cell.

목차

ABSTRACT
1. 서론
2. 비등방성 로킹을 위한 하이브리드 마이크로 텍스쳐링
3. 비등방성 로킹 힘 측정
4. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2022-003-000199730