메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
유호진 (충북대학교) 전종호 (충북대학교) 김한솔 (충북대학교) 이건호 (충북대학교) 신승철 (충북대학교) 조정호 (충북대학교) 이인환 (충북대학교) 김건휘 (충북대학교) 황면중 (서울시립대학교)
저널정보
대한용접·접합학회 대한용접·접합학회지 大韓熔接·接合學會誌 第40卷 第1號
발행연도
2022.2
수록면
84 - 89 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Metal 3D printing based on laser sintering is important in various industrial fields. However, its limitations are being revealed due to the need for expensive machines and metal powder. Meanwhile, wire arc additive manufacturing (WAAM) is rapidly arising as an alternative technology thanks to its relatively economic cost. Despite the boom of WAAM, its advantages are not that clear, because the majority of the research to date has been based on relatively expensive facilities, of which the cold metal transfer (CMT) machine is representative. In this study, the WAAM process is being improved with general pulsed GMA to lower the barrier of high cost and facilitate the adoption of the WAAM process in actual manufacturing industries. All process parameters, such as current, voltage, welding speed, and CTWD were examined to figure out a proper synergic line for WAAM. As a result, a high sulfur proportion wire and proper process parameters could be suggested. Finally, the proposed synergic line successfully produced a steel wall consisting of 10 layers with a thickness of 7.2 mm and a height of 22.4 mm, which can serve as an example of WAAM with pulsed GMA.

목차

Abstract
1. 서론
2. 공정 개발 실험
3. 실험 결과
4. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2022-581-001089672