메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
김윤호 (경북대학교) 판보판 (경북대학교) 황정하 (경북대학교)
저널정보
한국건축친환경설비학회 한국건축친환경설비학회 논문집 한국건축친환경설비학회 논문집 제16권 제1호
발행연도
2022.2
수록면
108 - 117 (10page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (4)

초록· 키워드

오류제보하기
Recently, the photovoltaic thermal (PVT) system, in which a solar collector that absorbs thermal energy is attached to the back of a PV panel to simultaneously generate electricity and heat, is garnering attention as one of the renewable energy systems. This study developed a prototype lightweight- CW.L-PVTs previously developed to be installed on the building’s outer wall using the curtain wall method by replacing the existing 3mm copper absorber with the 0.3mm aluminum absorber. Furthermore, in an attempt to examine the system performance, a field study was conducted according to the ISO 9806 test methods for assessing solar thermal collectors to compare and analyze the thermal and electrical efficiency for each material. At first, the Al absorber was expected to show a poor thermal and electrical performance due to lower heat conductivity compared to the Cu absorbers. However, with its good formability, the Al absorber was designed to have a thickness of 0.3mm, showing a faster heat conductivity than the Cu absorber. As a result, the thermal efficiency coefficient and the electrical efficiency coefficient of the CW.L-PVTs with Al absorbers were approximately 6% and 1% higher than those of the CW.L-PVTs with Cu absorbers, respectively.

목차

ABSTRACT
서론
CW.L-PVTs의 개요
흡열판 재질 선정 및 실험 환경 분석
실측실험에 따른 효율 분석
결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2022-546-001338080