메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
서보민 (서울과학기술대학교) 정동연 (대호테크) 박근 (서울과학기술대학교) 박창용 (서울과학기술대학교)
저널정보
Korean Society for Precision Engineering Journal of the Korean Society for Precision Engineering Journal of the Korean Society for Precision Engineering Vol.39 No.7
발행연도
2022.7
수록면
493 - 500 (8page)
DOI
10.7736/JKSPE.022.058

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The purpose of this study is to propose a better contact surface pattern of a heat radiating block in a progressive GMP (Glass Molding Process) heating assembly. In this study, a simulation model based on FEM was developed to perform a thermal analysis for the heating assembly. It was verified by comparing experimental results. The temperature distribution on the heating block surface and heating energy consumption was analyzed with the change of contact surface pattern and area of a heat radiating block. The considered pattern on the contact surface was cross (+) and straight (-) shape. The contact area ratio was changed from 16 to 100%. The simulation results show that the heating energy consumption increased to reach a target temperature with the increase of contact area ratio. The straight-shaped patterns on a heat radiating block presented more uniform temperature distribution on the mold heating surface than the cross shaped surface, whereas it resulted in a slightly higher energy consumption of up to 9%. This study shows that the contact surface pattern on a heat dissipating block can control the temperature distribution on the mold heating surface.

목차

1. 서론
2. 가열 어셈블리 모델 및 실험
3. 해석 결과
4. 요약 및 결론
REFERENCES

참고문헌 (16)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2022-555-001529859