메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
박찬혁 (국립창원대학교) 권화빈 (국립창원대학교) Ehtesham Ali (국립창원대학교) 서종혁 (해군) 이병욱 (해군) 김인식 (해군) 김성규 (해군) 박희성 (국립창원대학교)
저널정보
한국전산유체공학회 한국전산유체공학회지 한국전산유체공학회지 제28권 제1호
발행연도
2023.3
수록면
80 - 87 (8page)
DOI
10.6112/kscfe.2023.28.1.080

이용수

DBpia Top 5%동일한 주제분류 기준으로
최근 2년간 이용수 순으로 정렬했을 때
해당 논문이 위치하는 상위 비율을 의미합니다.
표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
The shell-and-tube heat exchanger is a heat exchanger that is widely used throughout the industry because it has the advantage of being easy to manufacture and install. The baffle installed inside the heat exchanger serves to improve heat transfer by supporting the tube and generating a vortex. In the case of a general segmental baffle, the heat transfer efficiency is high, but there is a problem that the pressure drop increases. In this study, numerical analysis was conducted to increase the heat transfer efficiency and reduce the pressure drop by locally changing the angle of the segmental baffle. The angle variables of the baffle were 0°, 15°, and 30°, and the research was conducted by setting the direction variables to FD (Forward direction) and BD (Backward direction). When the angle of the baffle is changed, the pressure drop inside the shell is reduced because the main flow flows along the curved surface of the baffle, and the pressure drop is reduced by up to 14.1%. In addition, the heat transfer efficiency is increased by increasing the strength of the eddy current. The overall performance of the heat exchanger was analyzed through thermal enhancement factor (TEF), and the efficiency was highest at BD 30°.

목차

1. 서론
2. 열교환기 구조 및 수치해석
3. 결과 및 토의
4. 결론
References

참고문헌 (16)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2023-559-001338203