지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2021.10
- 수록면
- 3,875 - 3,890 (16page)
- DOI
- 10.1007/s12540-020-00826-2
이용수
초록· 키워드
오류제보하기
Hot forged 1Cr?1Mo and 9Cr?1Mo steels are being progressively used in the making of the turbine rotors of steam powerplants. Forging of these steels requires precise control of processing parameters (i.e. strain, strain rate and temperature) fora defect free product. In line with the above mentioned applications, a comparative study to analyze the hot deformationbehavior of both the steels was carried out in the temperature domain of 850?1050 °C with varying strain rate (0.001?0.1 s?1)by compression test data obtained from Gleeble 3800® thermomechanical simulator up to true strain of 0.69. The flow stressbehavior of hot compressed specimens was analyzed by using material constants, activation energy and formulated Zener?Hollomon parameter. Critical conditions for dynamic recrystallization (DRX) of both the steels were calculated with thehelp of a mathematical model developed by Poliak and Jonas. Further, the variations in critical conditions were correlatedwith the Zener?Hollomon parameter. For both the steels, the current study also focused on the comparison of dynamicallyrecrystallized austenite ( XDRX ) volume fraction with respect to true strain by applying the concept of Avrami equation.
Finally, to validate the kinetics of DRX and softening mechanism, the microstructural evaluation and characterization havebeen carried out using optical and electron microscopy.
목차
등록된 정보가 없습니다.
참고문헌 (53)
참고문헌 신청
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
공구강의 고온 변형 거동 예측을 위한 모델 비교 연구
열처리공학회지
2018 .01
-
Hot Deformation Behavior and Dynamic Recrystallization of a Medium Carbon Cr–Mo Steel for Class 16.8 Bolts
Metals and Materials International
2024 .01
-
Hot Deformation Behavior and Dynamic Recrystallization Characteristics of 12Cr Ultra‑Super‑Critical Rotor Steel
Metals and Materials International
2019 .01
-
Modeling the Stress–Strain Curves and Dynamic Recrystallization of Nickel-Based A230 Alloy During Hot Deformation
Metals and Materials International
2022 .12
-
High-temperature Oxidation of Aluminum Hot-Dipped 2.25%Cr-1%Mo Steel
한국표면공학회 학술발표회 초록집
2017 .11
-
Evaluation of Dynamic Recrystallization Behaviors in Hot-Extruded AA5083 Through Hot Torsion Tests
Metals and Materials International
2017 .01
-
구성 모델과 공정 지도를 이용한 AISI 4340강의 고온 변형 거동
열처리공학회지
2017 .01
-
Microstructure Evolution Modeling and Simulation for Dynamic Recrystallization of Cr12MoV Die Steel During Hot Compression Based on Real Metallographic Image
Metals and Materials International
2019 .01
-
Hot Deformation Behaviors and Process Parameters Optimization of Low-Density High-Strength Fe–Mn–Al–C Alloy Steel
Metals and Materials International
2022 .10
-
용접 후 열처리를 재현한 2.25cr-1Mo steel의 충격인성에 미치는 미세편석의 원인
대한용접학회 특별강연 및 학술발표대회 개요집
2016 .04
-
Experimental Study and Numerical Simulation of Dynamic Recrystallization Behavior of a High-Strength Steel
Metals and Materials International
2021 .01
-
Characterization of Hot Deformation Behavior and Processing Map of As?Cast H13 Hot Work Die Steel
Metals and Materials International
2021 .09
-
Hot Deformation Characteristic and Strain Dependent Constitutive Flow Stress Modelling of Ti + Nb Stabilized Interstitial Free Steel
Metals and Materials International
2021 .01
-
Modeling Deformation Flow Curves and Dynamic Recrystallization of BA-160 Steel During Hot Compression
Metals and Materials International
2018 .01
-
Investigation on the Oxidation Characteristics of 9Cr-1Mo Steel under SO₂-bearing Gas Environment
대한용접학회 특별강연 및 학술발표대회 개요집
2019 .05
-
High-Temperature Deformation Characteristics and Constitutive Model of an Ultrahigh Strength Steel
Metals and Materials International
2021 .10
-
Kinetics and Critical Conditions for Initiation of Dynamic Recrystallization During Hot Compression Deformation of AISI 321 Austenitic Stainless Steel
Metals and Materials International
2017 .01
-
Use and Application of High-Performance Steels for Steel Structures
한국강구조학회지
2017 .04
-
Dynamic Recrystallization Behavior and Constitutive Modeling of As-Cast 30Cr2Ni4MoV Steel Based on Flow Curves
Metals and Materials International
2017 .01
-
고압수소가스환경하에서 Cr-Mo강의 피로균열성장률 측정연구
대한기계학회 춘추학술대회
2024 .06
이 논문의 저자 정보
최근 본 자료
댓글(0)
0