메뉴 건너뛰기
Library Notice
Institutional Access
If you certify, you can access the articles for free.
Check out your institutions.
ex)Hankuk University, Nuri Motors
Log in Register Help KOR
Subject

Experimental study on the axial bearing capacity of built-up cold-formed thin-walled steel multi-limb-section columns
Recommendations
Search

논문 기본 정보

Type
Academic journal
Author
Wentao Qiao (Shi Jiazhuang Tiedao University) Yuhuan Wang (Shi Jiazhuang Tiedao University) Renjie Zhu (Shi Jiazhuang Tiedao University) Ruifeng Li (Shi Jiazhuang Tiedao University) Mingshan Zhao (Singapore Institute of technology)
Journal
International Association of Structural Engineering And Mechanics Steel and Composite Structures, An International Journal Steel and Composite Structures, An International Journal Vol.40 No.6
Published
2021.9
Pages
781 - 794 (14page)

Usage

cover
Experimental study on the axial bearing capacity of built-up cold-formed thin-walled steel multi-limb-section columns
Ask AI
Recommendations
Search

Abstract· Keywords

Report Errors
To solve the shortcomings of single-limb or double-limb cold-formed thin-walled steel column easy to buckling failure and low bearing capacity, a new cross-shaped built-up cold-formed thin-walled steel multi-limb-section is proposed for columns. The structure is composed of several single-limb cold-formed thin-walled steel C-channel sections. The flanges and webs are connected by self-drilling screws. In order to assess the mechanical properties of this built-up multi-limb-section column and the influence of the slenderness ratio on the column behavior, the axial loading tests were carried out. Three kinds of single-limb column and built-up multi-limb-section column with different ratio of slenderness were tested. The deformation process, failure mode and bearing capacity were analyzed. The SC specimens failed with local buckling and distorted buckling, while the MC and LC specimens failed with local buckling and global instability. For the built-up multi-limb-section column, the section combination multiple is 12. Compared to the section combination multiple, the bearing capacity combination multiple is much higher. The SQ specimens’ combination factor is about 1.1, the combination factor of MQ specimens and LQ specimens are about 1.4 and 3.0, respectively. It is concluded that the overall combined-performance and structural efficiency of the specimens is proportional to the combination factor.

Contents

No content found

References (37)

Add References

Recommendations

It is an article recommended by DBpia according to the article similarity. Check out the related articles!

Related Authors

Recently viewed articles

Comments(0)

0

Write first comments.