메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
Tuyen-Nguyen Van (National center for technological progress) Trung-Do Quang (VNU University of Science) Thuan-Tran Hung (National center for technological progress) Quang-Chu Xuan (National center for technological progress) Tuan-Hoang Van (Phenikaa University) Hyungu Kim (Bluebank) Daehee Ahn (Bluebank)
저널정보
대한환경공학회 Environmental Engineering Research Environmental Engineering Research 제28권 제5호
발행연도
2023.10
수록면
185 - 198 (14page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
This study reinforced polyvinyl alcohol/sodium alginate (PVA/SA) gel beads immobilizing aerobic sludge with graphene oxide (GO) as a nanofiller. The different types of beads were made by various concentrations of GO (0.02, 0.2, 2, 20, and 200 ㎎/L). The effect of GO on beads structure was observed by comparing the mechanical properties of chemical oxygen demand (COD) and NH₄⁺-N removal efficiencies. The results showed that the PVA/SA/GO gel carriers have excellent reinforcement properties compared to non-GO gel carriers, while sphericity factor and methylene blue absorption are the same. The strongest carrier contains 200 ㎎/L GO, referred to as GO6. In addition, the highest COD and NH₄⁺-N removal efficiencies of GO6 gel carriers were 97 and 96.67%, respectively, which is higher than a non-GO PVA/SA (GO1) gel carrier. The addition of GO (200 ㎎/L) was thus an effective way to improve the mechanical strength of PVA/SA gel beads due to the strong interaction between GO and the PVA/SA matrix. It can also promote COD and NH₄⁺-N removal efficiency of immobilized bacteria inside the beads

목차

ABSTRACT
1. Introduction
2. Materials and Methods
3. Results and Discussion
4. Conclusions
References

참고문헌 (41)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2023-539-001331175