메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
유승민 (전북대학교) 이기태 (전북대학교)
저널정보
한양대학교 세라믹공정연구센터 Journal of Ceramic Processing Research Journal of Ceramic Processing Research 제17권 제7호
발행연도
2016.7
수록면
672 - 675 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
Micro-tubular solid oxide fuel cells with La0.8Sr0.2Ga0.8Mg0.2O3-δ (LSGM) electrolytes were fabricated by an electrophoreticdeposition (EPD). Four layers of anode support, an anode functional layer, a buffer layer, and an electrolyte layer weresuccessively deposited on a graphite rod via EPD, and the resulting architecture was subsequently sintered. The stability ofslurries prepared for the EPD process was controlled by the pH, conductivity, and zeta potential. While the electricalconductivity of slurry increased with an increase in the amount of phosphate ester as a charging agent, the pH decreased. Thethickness of the deposited layers increased with the applied voltage and deposition time. A micro-tubular SOFC single cell withthe configuration of Ni-GDC anode support/Ni-GDC anode functional layer (AFL)/LDC buffer/LSGM electrolyte/La0.6Sr0.4Co0.2Fe0.8O3-δ-Ce0.9Gd0.1O1.95 (LSCF-GDC) cathode showed a maximum power density of 0.51 W/cm2at 800 oC.

목차

등록된 정보가 없습니다.

참고문헌 (16)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0