지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 한국계산역학회 Computers and Concrete, An International Journal Computers and Concrete, An International Journal Vol.15 No.3
- 발행연도
- 2015.3
- 수록면
- 337 - 355 (19page)
이용수
초록· 키워드
오류제보하기
In this scientific work, an improved analytical solution for adhesive stresses in a concrete beam bonded with the FRP plate is developed by including the effect of the adherend shear deformations. The analysis is based on the deformation compatibility approach where both the shear and normal stresses are assumed to be invariant across the adhesive layer thickness. The shear stress distribution is supposed to be parabolic across the depth of the adherends in computing the adhesive shear stress and Timoshenko’s beam theory is employed in predicting adhesive normal stress to consider the shear deformation. Numerical results from the present analysis are presented both to demonstrate the advantages of the present solution over existing ones and to illustrate the main characteristics of adhesive stress distributions.
목차
등록된 정보가 없습니다.
참고문헌 (45)
참고문헌 신청
Adams, R.D. / 1986 / Structural adhesive joints in engineering / Elsevier
Ait Amar Meziane, M. / 2014 / An efficient and simple refined theory for buckling and free vibration of exponentially graded sandwich plates under various boundary conditions / J. Sandw. Struct. Mater. 16(3):293~318
Belabed, Z. / 2014 / An efficient and simple higher order shear and normal deformation theory for functionally graded material (FGM) plates / Composites: Part B 60:274~283
Khalil Belakhdar / 2011 / Effect of tapered-end shape of FRP sheetson stress concentration in strengthened beams / Steel and Composite Structures, An International Journal 11(6):435~454
Benachour, A. / 2008 / Interfacial stress analysis of steel beams reinforced with bonded prestressed FRP plate / Eng. Struct. 30:3305~3315
Ait Amar Meziane, M. / 2014 / An efficient and simple refined theory for buckling and free vibration of exponentially graded sandwich plates under various boundary conditions / J. Sandw. Struct. Mater. 16(3):293~318
Belabed, Z. / 2014 / An efficient and simple higher order shear and normal deformation theory for functionally graded material (FGM) plates / Composites: Part B 60:274~283
Khalil Belakhdar / 2011 / Effect of tapered-end shape of FRP sheetson stress concentration in strengthened beams / Steel and Composite Structures, An International Journal 11(6):435~454
Benachour, A. / 2008 / Interfacial stress analysis of steel beams reinforced with bonded prestressed FRP plate / Eng. Struct. 30:3305~3315
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Elastic analysis effect of adhesive layer characteristics in steel beam strengthened with a fiber-reinforced polymer plates
Structural engineering and mechanics : An international journal
2016 .01
-
Improved analytical method for adhesive stresses in plated beam: Effect of shear deformation
Advances in concrete construction
2019 .01
-
Elastic analysis effect of adhesive layer characteristics in steel beam strengthened with a fiber-reinforced polymer plates
Structural Engineering and Mechanics, An Int＇l Journal
2016 .01
-
A new model for adhesive shear stress in damaged RC cantilever beam strengthened by composite plate taking into account the effect of creep and shrinkage
Structural Engineering and Mechanics, An Int＇l Journal
2021 .09
-
Analysis and modeling of hyperstatic RC beam bonded by composite plate symmetrically loaded and supported
Steel and Composite Structures, An International Journal
2022 .11
-
Structural bonding for civil engineering structures: New model of composite I-steel-concrete beam strengthened with CFRP plate
Steel and Composite Structures, An International Journal
2021 .11
-
Influence of the presence of defects on the stresses shear distribution in the adhesive layer for the single-lap bonded joint
Structural Engineering and Mechanics, An Int＇l Journal
2015 .01
-
Influence of the presence of defects on the stresses shear distribution in the adhesive layer for the single-lap bonded joint
Structural engineering and mechanics : An international journal
2015 .01
-
Shear Strength of an Aluminum Alloy Bonded with a DP-460 Adhesive: Single Lap–shear Joints
접착 및 계면
2020 .01
-
Numerical analysis of the combined aging and fillet effect of the adhesive on the mechanical behavior of a single lap joint of type Aluminum/Aluminum
Structural Engineering and Mechanics, An Int＇l Journal
2022 .09
-
An analytical solution for free vibration of functionally graded beam using a simple first-order shear deformation theory
Wind & structures
2018 .01
-
Functional Adhesives: from Medical to Eco-friendly Adhesives
한국생물공학회 학술대회
2021 .10
-
New proposal for flexural strengthening of a continuous I-steel beam using FRP laminate under thermo-mechanical loading
Structural Engineering and Mechanics, An Int＇l Journal
2021 .01
-
Analytical analysis of the interfacial shear stress in RC beams strengthened with prestressed exponentially-varying properties plate
Advances in materials research : AMR
2018 .01
-
A refined quasi-3D hybrid-type higher order shear deformation theory for bending and Free vibration analysis of advanced composites beams
Wind & structures
2018 .01
-
Analytical and numerical modeling of interfacial stresses in beams bonded with a thin plate
Advances in computational design
2017 .01
-
Shear deformations based on variable angle truss model for concrete beams reinforced with FRP bars
Structural Engineering and Mechanics, An Int＇l Journal
2021 .01
-
A refined hyperbolic shear deformation theory for bending of functionally graded beams based on neutral surface position
Structural Engineering and Mechanics, An Int＇l Journal
2017 .01
-
Single variable shear deformation model for bending analysis of thick beams
Structural engineering and mechanics : An international journal
2018 .01
-
Mechanical behaviour of FGM sandwich plates using a quasi-3D higher order shear and normal deformation theory
Structural engineering and mechanics : An international journal
2017 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0