지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 한국유체기계학회 International Journal of Fluid Machinery and Systems International Journal of Fluid Machinery and Systems Vol.16 No.1
- 발행연도
- 2023.3
- 수록면
- 129 - 139 (11page)
- DOI
- 10.5293/IJFMS.2023.16.1.129
이용수
초록· 키워드
오류제보하기
This study proposes a new unified performance model for the S-shaped characteristics of pump–turbines considering reverse flow. The turbine and reverse pump characteristic equations were unified using a sigmoid function considering the reverse flow. In the analysis, the torque coefficient is larger for small guide vane angles than for large guide vane angles due to an increase in the turbine Euler head. In the turbine mode, the runner shock loss and the circumferential discharge loss are directly proportional to the shock dynamic pressure and the circumferential dynamic pressure in the discharge section, respectively. In the reverse pump mode, the guide vane shock and friction losses are directly proportional to the shock dynamic pressure and the absolute dynamic pressure, respectively. The S-shaped characteristics of pump-turbines can be completely simulated using the proposed theoretical model.
목차
Abstract
1. Introduction
2. Theoretical Model
3. Experimental Equipment and Method
4. Numerical Simulation Method
5. Result and Consideration
6. Conclusion
References
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Flow Characteristics around Stay-vanes in a Pump-Turbine
한국유체기계학회 학술대회 논문집
2017 .12
-
Investigation into the Internal Flow Characteristics of a Pump-turbine Model
한국유체기계학회 논문집
2015 .08
-
Internal Flow Analysis of 3㎾ Micro Pump Turbine Model
한국신·재생에너지학회 학술대회 초록집
2016 .05
-
Design and Experimental Analysis on 3kW class Pump Turbine Model for Renewable ESS
한국유체기계학회 논문집
2019 .08
-
Hydraulic Design of a 3 kW-Class Pump-turbine Model and Performance Investigation by CFD
한국유체기계학회 논문집
2017 .12
-
Influence of Guide Vane Setting in Pump Mode on Performance Characteristics of a Pump-Turbine
International Journal of Fluid Machinery and Systems
2017 .06
-
OPTIMIZATION FOR PUMP AND TURBINE PERFORMANCE OF A COUNTER-ROTATING TYPE PUMP-TURBINE UNIT
AFORE
2015 .11
-
Design of a Pump-Turbine Based on the 3D Inverse Design Method
한국유체기계학회 논문집
2015 .02
-
Flow Analysis and Optimization Design of Reversible Pump-Turbines
AFORE
2024 .11
-
Transient Characteristics of Pump Turbines in Pumped-storage Power Station
한국신·재생에너지학회 학술대회 초록집
2018 .04
-
Effect of Blade Angle Distribution in the Performance of PUMP Turbine at S-Curve Region
AFORE
2023 .11
-
가스터빈 베인의 역설계
한국생산제조학회 학술발표대회 논문집
2021 .07
-
The effect of the guide vane number and inclined angle on the performance improvement of a low head propeller turbine
Journal of Advanced Marine Engineering and Technology (JAMET)
2021 .08
-
Effects of Impeller Shape on the Hydraulic Loss and Transient Flow of Pump Turbine
AFORE
2022 .09
-
Simulation model for Francis and Reversible Pump Turbines
International Journal of Fluid Machinery and Systems
2015 .09
-
Fast Transition from Pump to Turbine Mode of Operation
International Journal of Fluid Machinery and Systems
2018 .09
-
마이크로 가스터빈 내의 열유동해석
한국기계기술학회지
2015 .01
-
Cavitation Characteristics of a Pump-turbine Model by CFD Analysis
한국유체기계학회 논문집
2015 .08
-
Study on Through-flow Model for Turbine System Considering Three-dimensional Flow Field Distortion Effect
International Journal of Fluid Machinery and Systems
2018 .12
-
Numerical Analysis of the Performance of Cross Flow Turbine by the Shapes of Runner Blade
한국유체기계학회 학술대회 논문집
2015 .06
이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2023-554-001338864