메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
Lijuan Kong (Shijiazhuang Tiedao University) Shuheng Xie (Shijiazhuang Tiedao University) Caihui Wang (Shijiazhuang Tiedao University) Lihuan Wang (Hebei Institute of Civil Air Defence Works Design and Research)
저널정보
한국콘크리트학회 International Journal of Concrete Structures and Materials International Journal of Concrete Structures and Materials Vol.17 No.4
발행연도
2023.7
수록면
667 - 682 (16page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
To investigate the application of iron tailings in cement-based materials as fine aggregate and mineral admixture, six iron tailings sands were selected from different places of origin, and the methods of acid and alkali activation were adopted to increase the activity of tailings powder. The strength of mortar was evaluated and the composition and microstructure were analyzed to explore the mechanism. The experimental results show that iron tailings sands had little adverse effect on the mortar strength, and there was a maximum increase of 13.2% in 28-day compressive strength compared with that of river sand mortar. The hardness values of all the iron tailings sand and the interfacial transition zone (ITZ) around them were higher than that of natural river sand, but their Ca/Si ratios in the ITZ was lower, indicating a chemical reaction occurred between the iron tailings and cement paste. Generally, the iron tailings sand with higher SiO₂ content and finer particles tend to have higher activity. In addition, the pozzolanic activity of iron tailings powder could be greatly promoted by chemical activation, especially by acid activation. The activity index of cement mortar with unactivated iron tailings powder was only 63% at 28 days, whereas that of acid-activated and compound-activated samples reached up to 93%, and the heights of the maximum heat flow peak of these samples were even higher than that of the control sample without iron tailings powder, and the time to reach the peak was in some advance, moreover their impedance parameters were close to the control sample.

목차

Abstract
1 Introduction
2 Experimental Procedure
3 Results and Discussion
4 Conclusions
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0