메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
김용중 (한국전력공사) 김효성 (공주대)
저널정보
전력전자학회 전력전자학회논문지 전력전자학회 논문지 제28권 제4호
발행연도
2023.8
수록면
249 - 254 (6page)
DOI
10.6113/TKPE.2023.28.4.249

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
In AC power systems, the load current naturally reaches zero every half cycle, which results in a short-term spark that lasts less than a quarter cycle after the switch has been turned off or the plug has been removed from the socket. However, in DC power systems, the load current flows continuously without zero crossings, which causes the breaking arc to be prolonged and to develop easily into plasma, resulting in a high risk of arc accidents. Therefore, to ensure safety against breaking arcs in DC power systems, protective regulations must be established, and the physical properties of arc generation and extinction in DC power systems must be examined. This study aims to explore the experimental characteristics of breaking arcs in low-voltage DC systems that occur in normal brass electrodes, which are the main components of residential contact-type wall-mounted switches and socket-outlet plugs. This study analyzes the characteristics of breaking arcs between brass electrodes and presents a safe operation area for the arcs that is defined by the supply voltage and load power level. This study will enable nonexperts to use conventional brass electrode-based wall-mounted switches and socket-outlet plugs safely.

목차

Abstract
1. 서론
2. 실험조건
3. 실험결과
4. 아크안전 운전영역
5. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0