메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
홍성빈 (가천대학교) 박아미 (LIG Nex1) 이종학 (LIG Nex1) 정재호 (가천대학교)
저널정보
한국유체기계학회 한국유체기계학회 학술대회 논문집 2023년 한국유체기계학회 하계학술대회
발행연도
2023.7
수록면
178 - 183 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
Recently, an increased demand for the development of unmanned systems and surveillance technologies, as well as a rapid increase in demand for high-performance camera sensor, has been observed due to the export and advancement of defense technology. The heat generated by camera sensors is also increasing as a result of camera performance improvement, and the importance of camera can lead to reduces target detection accuracy, misidentification, and camera sensor failure. In this study, an optimal canopy shape inducing the stack effect was designed to enhance the heat removal performance of camera systems installed on naval vessels. Through Computational Fluid Dynamics (CFD) analysis, a reduction of approximately 2.3·C in the component temperature, measured by maximum temperature inside the camera sensor, was confirmed compared to the existing shape. The improvement in cooling performance is derived from the increased flow rated facilitated by natural convection, and it was observed that natural circulation flow rate significantly increases non-linearly as the curvature radius decrease, with a concurrent 43.76% increase in heat transfer rate. In conclusion, the optimization of camera sensor heat removal performance through natural convection, induced by the optimal design of the canopy, was achieved.

목차

ABSTRACT
1. 서론
2. 수치해석 방법론
3. 차양판 설계변수 및 최적화 방법론
4. 결과 및 고찰
5. 결론
참고문헌(Reference)

참고문헌 (0)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0102-2023-554-001652169