메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
최진우 (Seoul National University of Science & Technology) 성재용 (Seoul National University of Science & Technology) 김준현 (Seoul National University of Science & Technology)
저널정보
한국생산제조학회 한국생산제조학회지 한국생산제조학회지 Vol.32 No.5
발행연도
2023.10
수록면
274 - 282 (9page)
DOI
10.7735/ksmte.2023.32.5.274

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
This study has examined the performance and temperature change characteristics of a satellite film heater fabricated using screen printing technology using silver paste. The temperature variations in the film heater attached to CFRP and Al 6061 substrates were modeled numerically in an FM (Flight Model) environment incorporating radiation heat transfers in a vacuum state under various sink temperatures. The results demonstrate that the constrained distance between heaters increases non-linearly with the sink temperature. The required power density to reach the maximum allowable temperature diminishes with the sink temperature. The required power density is higher than the ESCC standard of 0.54 W/cm², which is assessed in an EM (engineering model) environment without substrate.

목차

ABSTRACT
1. 서론
2. 연구 방법
3. 결과 및 고찰
4. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-151-24-02-088072604