지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2023.12
- 수록면
- 28 - 33 (6page)
- DOI
- 10.5207/JIEIE.2023.37.6.028
이용수
초록· 키워드
오류제보하기
This paper used 3D Finite Element Method (FEM) and Response Surface Method (RSM) to find an improved design point for the steady-state characteristics of a PM claw pole stepping motor. The considered design parameters are air gap length, tapered air gap, pole width, and pole height. As a result, an optimum model can be chosen. The effects of assembly errors on detent torque are examined as the difference of the initial points of two stacks is increased. The analysis was carried out using the range from 0 to 3 degrees. Finally, the results are verified and compared with the experimental results.
목차
Abstract
1. Introduction
2. Main Discourse
3. Analysis Results of the Design
4. Comparison between the Analysis Results and the Experimental Result
5. Conclusion
References
참고문헌 (5)
참고문헌 신청
Edward P. Furlani, “Permanent magnet and electromechanical devices: Materials, analysis, and applications (Electromagnetism),” Academic Press, 2021.
T. Ishikawa, R. Takakusagi, and M. Matsunami, “Static torque characteristics of permanent magnet type stepping motor with claw poles,” in IEEE Transactions on Magnetics, vol. 36, no. 4, pp. 1854-1857, 2000.
D. -S. Jung, et al., “Optimization for improving static torque characteristic in permanent magnet stepping motor with claw poles,” in IEEE Transactions on Magnetics, vol. 43, no. 4, pp. 1577-1580, 2007.
Seung-Bin Lim, et al., “Permanent magnet overhang effect in permanent magnetic actuator using 3 dimension equivalent magnetic circuit network method,” KIEE International Transactions on Electrical Machinery and Energy Conversion Systems, vol. 5-B, no. 2,
Y. Okada, Y. Kawase, and Y. Hisamatsu, “Analysis of claw-poled permanent magnet-stepping motor considering deterioration of material characteristics by remains stress,” in IEEE Transactions on Magnetics, vol. 39, no. 3, pp. 1721-1724, 2003.
T. Ishikawa, R. Takakusagi, and M. Matsunami, “Static torque characteristics of permanent magnet type stepping motor with claw poles,” in IEEE Transactions on Magnetics, vol. 36, no. 4, pp. 1854-1857, 2000.
D. -S. Jung, et al., “Optimization for improving static torque characteristic in permanent magnet stepping motor with claw poles,” in IEEE Transactions on Magnetics, vol. 43, no. 4, pp. 1577-1580, 2007.
Seung-Bin Lim, et al., “Permanent magnet overhang effect in permanent magnetic actuator using 3 dimension equivalent magnetic circuit network method,” KIEE International Transactions on Electrical Machinery and Energy Conversion Systems, vol. 5-B, no. 2,
Y. Okada, Y. Kawase, and Y. Hisamatsu, “Analysis of claw-poled permanent magnet-stepping motor considering deterioration of material characteristics by remains stress,” in IEEE Transactions on Magnetics, vol. 39, no. 3, pp. 1721-1724, 2003.
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
10W 급 단상 Claw-Pole Type 모터 설계 및 특성분석
대한전기학회 학술대회 논문집
2016 .10
-
Claw-Pole Type Motor 설계 변수에 따른 특성분석
대한전기학회 학술대회 논문집
2016 .03
-
Claw-Pole Type Motor의 스위치 Lead Angle에 따른 토크 파형 연구
대한전기학회 학술대회 논문집
2020 .07
-
Ferrite 자석 적용에 따른 계자 권선형 Claw-Pole type Motor 무부하 특성분석
대한전기학회 학술대회 논문집
2017 .10
-
On the Effect of Claw Geometry on the Vibration of Single-Phase Claw-Pole BLDC Machines
ICPE(ISPE)논문집
2023 .05
-
유한요소법을 이용한 V형상 극변환 메모리 모터의 특성 분석
전기학회논문지
2015 .06
-
회전자 권선형 단상 Claw-Pole Type 모터의 회전자 포화에 따른 모터의 성능 분석
대한전기학회 학술대회 논문집
2015 .10
-
48V MHSG용 클로우폴 코아의 표면 홈 가공에 따른 특성 연구
한국자동차공학회 추계학술대회 및 전시회
2016 .11
-
48V Claw pole 타입 Mild Hybrid용 시동발전기 (MHSG)의 최대 토크 제어
대한전기학회 학술대회 논문집
2016 .10
-
스탭 모터의 폐루프 제어를 위한 자극 위치 추정 알고리즘
한국정밀공학회 학술발표대회 논문집
2017 .12
-
Optimal design of a V-type consequent-pole motor with shifted PMs for reducing the PM usage and the torque ripple
대한전기학회 학술대회 논문집
2020 .07
-
Consequent-pole 모터의 비대칭 공극 적용을 통한 성능 개선 연구
대한전기학회 학술대회 논문집
2024 .10
-
Analysis and Design Optimization of Surface Permanent Magnet Motor to Improve Torque Density and Ripple
ICPE(ISPE)논문집
2023 .05
-
Design and Characteristics Analysis of a Novel Single-phase Hybrid SRM for Blender Application
Journal of Electrical Engineering & Technology
2018 .09
-
Analysis and Experimental Characterization of Low Speed Direct Drive Fractional Slot Concentrated Winding Surface Permanent Magnet Synchronous Motor with Consequent Pole Rotor
Journal of Electrical Engineering & Technology
2015 .09
-
차량 액추에이터용 영구자석 동기전동기의 보조극을 이용한 코깅 토크 저감 최적 설계
전기학회논문지
2025 .03
-
Effect of Internal Bias Field on Poling Behavior in Mn-Doped Pb(Mg1/3Nb2/3)O3-29 mol%PbTiO3 Single Crystal
전기전자재료학회논문지
2021 .09
-
Optimized design of a v-type consequent-pole motor for reducing permanent magnet usage
대한전기학회 학술대회 논문집
2019 .10
-
물체의 고유 Pole을 이용한 지하 속의 빈 공간 식별 방안
한국산학기술학회 논문지
2021 .06
-
Transient response analysis of tapered FRP poles with flexible joints by an efficient one-dimensional FE model
Structural engineering and mechanics : An international journal
2016 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-151-24-02-088524818