지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2024.8
- 수록면
- 17 - 28 (12page)
이용수
초록· 키워드
오류제보하기
The solar power generation market has experienced rapid growth in recent years, with the industry increasingly shifting towards building-integrated solar solutions due to limitations in ground-based installation sites. Building-integrated photovoltaics (BIPVs) have gained attention for their potential to efficiently utilize land resources and enhance the spatial utilization of buildings. While current BIPV systems primarily focus on utilizing roof surfaces for solar energy generation, exploring building façades (vertical surfaces) for solar power generation is essential for future advancements. To address this challenge, a novel approach is required to reduce the weight of conventional silicon solar modules. This study aimed to design, manufacture, and demonstrate thin-film solar modules that are lightweight and flexible for attachment to building exteriors. The manufactured thin-film solar modules had a conversion efficiency of 13.8% and achieved technical completeness by obtaining KS certification (KS C 8562) for thin-film solar modules. A demonstration study of a curved roof solar module was conducted to verify the performance and applicability of curved thin-film solar modules. The demonstration system had a capacity of 7.36 kWp, and its output was analyzed over 27 months. During this period, the monthly average capacity factor was 15%, demonstrating superior results compared with the utilization rate in the same region.
목차
Abstract
1. 서론
2. 기술적 배경
3. 실증 설계
4. 결과
5. 결론
REFERENCES
참고문헌 (13)
참고문헌 신청
Intergovernmental Panel on Climate Change (IPCC), Global Warming of 1.5°C : Special Report, IPCC, 2020. https://www.ipcc.ch/sr15/. last accessed on the 8th October 2018.
Related Government Ministry, Strategies for Carbon Neutrality and Green Growth, 26th October 2022.
Oh, J., Ko, J., Nam, W., and Jang, J., A Study on the Design Analysis of Solar Noise Barrier Wall and Design Development of Temporary Noise Barrier Wall Based on CIGS, Journal of the Korea Institute of Spatial Design, Vol. 18, No. 7, pp. 479-490, 2023.
Cho, G. Y., Eom, J., Oh, M., and Kim, E., Empirical Analysis and Thermal Performance Evaluation for Building Integrated Photovoltaic System, Journal of the Korean Solar Energy Society, Vol. 41, No. 1, pp. 69-77, 2021.
Kwon, T. H., Kim, J., Kim, E., and Hong S., Effect on Power Generation of Floating Photovoltaic Power System Power by Water Level Change, Journal of the Korean Solar Energy Society, Vol. 42, No. 2, pp. 13-21, 2022.
Related Government Ministry, Strategies for Carbon Neutrality and Green Growth, 26th October 2022.
Oh, J., Ko, J., Nam, W., and Jang, J., A Study on the Design Analysis of Solar Noise Barrier Wall and Design Development of Temporary Noise Barrier Wall Based on CIGS, Journal of the Korea Institute of Spatial Design, Vol. 18, No. 7, pp. 479-490, 2023.
Cho, G. Y., Eom, J., Oh, M., and Kim, E., Empirical Analysis and Thermal Performance Evaluation for Building Integrated Photovoltaic System, Journal of the Korean Solar Energy Society, Vol. 41, No. 1, pp. 69-77, 2021.
Kwon, T. H., Kim, J., Kim, E., and Hong S., Effect on Power Generation of Floating Photovoltaic Power System Power by Water Level Change, Journal of the Korean Solar Energy Society, Vol. 42, No. 2, pp. 13-21, 2022.
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
BIM을 활용한 컬러모듈 BIPV 건축 설계 최적화 방안 연구 - 서울 지역 실증 일사량 데이터 중심으로 -
한국BIM학회논문집
2019 .01
-
건물 일체형 태양광 발전시스템(BIPV) 지붕의 화재 성능 분석
한국태양에너지학회 논문집
2023 .12
-
Review on the Progress in Building Integrated Photovoltaic Materials and Module Technology
신·재생에너지
2019 .12
-
Emirical Research on Flexible Thin Film Solar System Utilizing Curved Roofs
AFORE
2021 .10
-
대면적 태양전지의 분할 수에 따른 모듈 특성 모델링
전기전자재료학회논문지
2023 .03
-
폐 태양광모듈의 재활용 및 재 제조 태양광모듈의 내구성 평가
한국신·재생에너지학회 학술대회 초록집
2022 .04
-
Evaluation Results of Solar Module and Solar Cell during Damp-Heat Test
AFORE
2024 .11
-
금속기와 일체형 태양광 모듈의 발전효율 및 열적 거동 특성 분석
한국태양에너지학회 학술대회논문집
2023 .11
-
Comparative Analysis of Power Generation Efficiency and Reliability Between Reused and New Solar Modules in a 100㎾ Demonstration Complex
한국태양에너지학회 학술대회논문집
2024 .10
-
건물 적용을 위한 경량 박막 태양광 모듈 개발
한국태양에너지학회 학술대회논문집
2020 .10
-
Multilayer Perceptron Model to Estimate Solar Radiation with a Solar Module
바이오시스템공학(구 한국농업기계학회지)
2018 .01
-
Cu(InGa)Se2 박막 태양전지 흡수층 제조 공정 연구
한국에너지학회 학술발표회
2017 .04
-
태양광 모듈의 매칭에 관한 연구
한국조명·전기설비학회 학술대회논문집
2017 .05
-
Towards High Efficiency Thin Film Solar Cells
한국정밀공학회 학술발표대회 논문집
2017 .05
-
경량화 태양광 모듈의 내구성 보완에 관한 연구
전기전자재료학회논문지
2021 .01
-
대면적 양면 태양광 모듈의 기계적 신뢰성 연구
Current Photovoltaic Research
2022 .12
-
IEC 우박시험에 대한 태양광모듈 충돌 해석
한국태양에너지학회 논문집
2020 .08
-
Pure Solar Cell Durability Evaluation and Test Technique Proposal
한국신·재생에너지학회 학술대회 초록집
2019 .11
-
태양광 모듈 상태 판단 시스템
한국정보과학회 학술발표논문집
2018 .12
-
Comparison of Carbon Generation of Solar Module by Power Plant Operation
한국태양에너지학회 학술대회논문집
2024 .10
이 논문과 함께 이용한 논문
최근 본 자료
댓글(0)
0