지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
이용수
등록된 정보가 없습니다.
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
적층 제조를 위한 Ti-6Al-4V 합금 분말 적층 안정성 분석 기법 개발
대한용접학회 특별강연 및 학술발표대회 개요집
2023 .05
Heat treatment for enhancing impact toughness and fatigue cycle of Ti-6Al-4V joint
대한용접학회 특별강연 및 학술발표대회 개요집
2024 .10
A Study of Electron Beam Welding Ratios on Dissimilar Titanium Alloys : Ti-10V-2Fe-3Al and Ti-6Al-4V
대한용접학회 특별강연 및 학술발표대회 개요집
2019 .05
Influence of post-heat treatment on the interface-correlated bonding properties of roll-bonded 3-ply Ti/Al/Ti metallic sheets
한국소성가공학회 학술대회 논문집
2021 .11
유한요소법을 이용한 Ti-6Al-4V 의 선삭가공 최적화에 관한 연구
한국CDE학회 학술발표회 논문집
2015 .02
L-PBF 방식의 Ti-6Al-4V 이용한 가변 두께 적층 공정 개발을 통한 기계적 특성 평가
대한전기학회 학술대회 논문집
2023 .10
Ti-6Al-4V 와이어 적층공정에서 질소 가스의 영향
한국정밀공학회 학술발표대회 논문집
2017 .05
타이타늄 합금(Ti-6Al-4V)의 판재성형에 있어 α-case(알파-케이스) 형성에 대한 연구
한국정밀공학회 학술발표대회 논문집
2019 .05
Electrochemical and Spectroscopic Study on the Corrosion of Ti–5Al and Ti–5Al–5Cu in Chloride Solutions
Metals and Materials International
2019 .01
Effect of Volume Fraction of Ti on Microstructure Evolution and Thermal Properties of Al/Ti Laminated Composites
Metals and Materials International
2024 .04
LPBF용 Ti-6Al-4V 합금 분말의 유동특성 평가 기술
대한용접학회 특별강연 및 학술발표대회 개요집
2023 .05
금속 적층 가공을 통한 Ti6Al4V 피로시험 시편 설계
한국정밀공학회 학술발표대회 논문집
2020 .09
A study on deducing optimal heat-treatment condition correlated to the generation of intermetallic compounds at joint interface of a Ti/Al/Ti 3-ply clad sheet
한국소성가공학회 학술대회 논문집
2022 .05
온간단조 온도 범위에서 Ti-6Al-4V의 Ti 합금의 유동특성
한국소성가공학회 학술대회 논문집
2021 .11
Ti-Al-X 계 코팅막의 열역학적 해석에 관한 연구
한국생산제조학회 학술발표대회 논문집
2021 .07
Microstructure and Refinement Performance of Al-Ti-C Master Alloy: Effect of Excess Ti on the Growth and Nucleating Ability of TiC Particles
Metals and Materials International
2017 .01
Solid-state sintering mechanism of blended elemental Ti-6Al-4V powders
한국분말야금학회지
2018 .01
Ti-6Al-4V 합금의 형상 뒤틀림 방지를 위한 적층제조 공정 최적화 전략
대한용접학회 특별강연 및 학술발표대회 개요집
2023 .05
3D Printing 이용한 Ti-6Al-4V 벌크헤드 제작방법 및 작업조건
한국항공우주학회 학술발표회 초록집
2022 .04
Ti-6Al-V4 합금의 고온 변형 후 기계적 물성 변화에 관한 연구
한국소성가공학회 학술대회 논문집
2017 .10
0