지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2024.4
- 수록면
- 1,513 - 1,525 (13page)
- DOI
- 10.1016/j.net.2023.12.005
이용수
초록· 키워드
오류제보하기
An improved mitigation system for thermally-induced steam generator tube rupture accidents was introduced to prevent direct environmental release of fission products bypassing the containment in the OPR1000. This involves injecting bypassed steam into the containment, cooling, and decontaminating it using a water coolant tank. To evaluate its performance, a severe accident analysis was performed using the MELCOR 2.2 code for OPR1000. Simulation results show that the proposed system sufficiently prevented the release of radioactive nuclides (RNs) into the environment via containment injection. The pool scrubbing system effectively decontaminated the injected RN and consequently reduced the aerosol mass in the containment atmosphere. However, the decay heat of the collected RNs causes re-vaporization. To restrict the re-vaporization, an external water source was considered, where the decontamination performance was significantly improved, and the RNs were effectively isolated. However, due to the continuous evaporation of the feed water caused by decay heat, a substantial amount of steam is released into the containment. Despite the slight pressurization inside the containment by the injected and evaporated steam, the steam decreased the hydrogen mole fraction, thereby reducing the possibility of ignition.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Key Findings from the ARTIST Project on Aerosol Retention in a Dry Steam Generator
Nuclear Engineering and Technology
2016 .01
-
Integral effect test for steam line break with coupling reactor coolant system and containment using ATLAS-CUBE facility
Nuclear Engineering and Technology
2021 .08
-
Parametric analyses for the design of a closed-loop passive containment cooling system
Nuclear Engineering and Technology
2021 .04
-
3차원 CFD 해석을 위한 OPR1000 증기발생기 모델 개발
한국전산유체공학회 학술대회논문집
2019 .10
-
Numerical analysis on in-core ignition and subsequent flame propagation to containment in OPR1000 under loss of coolant accident
Nuclear Engineering and Technology
2022 .08
-
Proposal and Analysis of Hydrogen Mitigation System Guiding Hydrogen in Containment Building
Journal of Advanced Marine Engineering and Technology (JAMET)
2015 .06
-
OPR1000 원전 증기발생기 세관파단사고 시 2차측 냉각수 역유입에 의한 붕소희석 영향 평가
한국유체기계학회 학술대회 논문집
2021 .12
-
Contribution of Production and Loss Terms of Fission Products on In-containment Activity under Severe Accident Condition for VVER-1000
Nuclear Engineering and Technology
2019 .01
-
Thermal-Hydraulic Design of a Once-Through Steam Generator Considering a Size Limit
대한기계학회 춘추학술대회
2022 .11
-
Effective Decontamination Treatment Process of Steam Generator
한국방사성폐기물학회 학술대회
2018 .01
-
Optimization and Evaluation of Spherical Tube Sheet Design for Steam Generator
대한기계학회 춘추학술대회
2024 .11
-
Implementation of a new empirical model of steam condensation for the passive containment cooling system into MARS-KS code: Application to containment transient analysis
Nuclear Engineering and Technology
2021 .10
-
중대사고 시 격납건물 내 핵분열생성물 거동 예비 분석
한국에너지학회 학술발표회
2019 .05
-
Effect of Tube Thickness on Thermal-Hydraulic Design of a Once-Through Steam Generator
대한기계학회 춘추학술대회
2023 .04
-
Crash analysis of military aircraft on nuclear containment
Structural engineering and mechanics : An international journal
2015 .01
-
OPR1000 TI-SGTR 사고 MELCOR 해석의 자연순환유동 입력인자 생산을 위한 CFD 해석
한국전산유체공학회지
2021 .09
-
Experimental investigation on bubble behaviors in a water pool using the venturi scrubbing nozzle
Nuclear Engineering and Technology
2021 .06
-
초고온연계 수소생산시설을 위한 증기발생기 설계
대한기계학회 춘추학술대회
2021 .11
-
MELCOR를 이용한 OPR1000 원전의 이동형설비에 의한 사고 완화 평가
한국에너지학회 학술발표회
2024 .10
-
의류관리기에서 스팀 분사 시간이 히트펌프 사이클에 미치는 영향에 대한 실험적 연구
대한설비공학회 학술발표대회논문집
2022 .06
최근 본 자료
댓글(0)
0