메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
이상하 (서울대학교) 이태하 (서울대학교) 장휴산 (서울대학교) 김찬규 (서울대학교) 백승효 (목원대학교) 여명석 (서울대학교)
저널정보
대한설비공학회 설비공학논문집 설비공학논문집 제36권 제12호
발행연도
2024.12
수록면
577 - 585 (9page)
DOI
10.6110/KJACR.2024.36.12.577

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
This study analyzed thermal performance of a horizontal mat-type ground heat exchanger (GHE) using capillary tubes through numerical simulations with TRNSYS 18. Although horizontal GHEs are cost-effective alternatives to vertical systems, they typically exhibit lower thermal performances and require more installation space. In consideration of these challenges, this research examined effects of installation depth and inlet fluid temperature on heat exchange efficiency. The TRNSYS 18 model validated against experimental data showed a high accuracy with relative errors between 2% and 5%. Simulations indicated that an increase in installation depth generally resulted in an improvement in heat exchange. However, this improvement stabilized beyond an optimal depth of approximately 7.5 m. In particular, an increase in depth from 1.5 to 4.5 m resulted in a 30% enhancement in heat exchange rate. The maximum performance was recorded at a depth of 7.5 m, with a slight decline of 1.63% to 3.33% observed at 10 m. It was found that higher inlet fluid temperatures reduced heat exchange efficiency due to a diminished temperature differential with the ground. This study concludes that a depth of approximately 4.5 m is needed to achieve a thermal exchange rate of 50 W/m², with 7.5 m providing optimal overall performance.

목차

Abstract
1. 서론
2. 예비적 고찰
3. 시뮬레이션
4. 열성능 평가
5. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-151-25-02-091189542