메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
이준근 (LG Electronics) 윤기조 (LG Electronics) 김종운 (LG Electronics) 안성우 (LG Electronics) 이남기 (LG Electronics) 이희남 (Suncheon National University)
저널정보
한국소음진동공학회 한국소음진동공학회논문집 한국소음진동공학회논문집 제35권 제1호(통권 282호)
발행연도
2025.2
수록면
29 - 38 (10page)
DOI
10.5050/KSNVE.2025.35.1.029

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
This paper proposes an efficient seismic qualification method for representative HVAC systems in nuclear power plants, following the guidelines of US NRC Regulatory Guide 1.10, IEEE-344, and ASME Section III. Through structural and geometrical similarity analysis, candidate items for qualification were grouped using dynamic similarity principles, significantly streamlining the process. For large-scale equipment where seismic testing is impractical, a combined approach of seismic analysis and testing was employed. Seismic analysis included modal analysis and response spectrum analysis, while seismic tests were conducted on active components such as driving motors, fans, compressors, and control panels. Input seismic loadings accounted for response amplification due to the equipment’s modal properties, incorporating specified margins to ensure conservative qualifications. The combined stresses derived from these procedures were confirmed to be below allowable limits, with a stress ratio under 0.8. Additionally, no mechanical or electrical failures were observed in the seismic analyses or tests. Consequently, the authors verified the safety and reliability of the HVAC system for use in safety-related nuclear applications.

목차

ABSTRACT
1. 서론
2. 내진해석
3. 내진시험
4. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-151-25-02-092334452