지난 20세기 동안 인류문명에 가장 크게 기여한 과학적인 발명은 TV, 컴퓨터 및 인터넷이라 할 수 있으며 21세기에는 대용량, 초고속 정보처리 기술에 바탕을 둔 정보화 시대가 도래 중인데 이러한 정보처리 기술의 근간은 컴퓨터와 정보통신을 뒷받침 할 수 있는 각종 크고 작은 디스플레이의 발달이 뒤따라 주어야 할 것이다. 지난 20세기에 발명된 TFT-LCD, PDP, FED 및 EL 등과 같은 각종 디스플레이는 주로 정보전달 매체인 PC, Mobile, 디지털 TV, LCD 및 PDP 패널 등 전기 전자 및 정보통신 장비를 비롯한 가전제품 등에 다양하게 응용되어 디스플레이 시장은 매우 빠른 속도로 성장하고 있다. 본 논문에서는 전자주입물질의 변화를 통해 OLED 소자를 만들어 특성을 조사하였다. 표면의 거칠기 변화를 보기 위해서 AFM을 이용하였다. 전자주입물질에 따른 유기발광다이오드의 전기적 특성에 관한 연구를 위하여 2층 구조 소자 ITO/TPD/Alq3/Al 3층 구조 소자 ITO/TPD/Alq3/Li2CO3 or Na2CO3 or Cs2CO3/Al와 ITO/TPD/Alq3/BCP/Li2CO3 or Na2CO3 or Cs2CO3/Al의 4층 구조 소자 그리고 5층 구조의 소자인 ITO/AF/TPD/Alq3/BCP/Li2CO3 or Na2CO3 or Cs2CO3/Al 를 제작 연구하였고 그 결과는 다음과 같다. 3층, 4층 그리고 5층 구조를 제작하여 각각 휘도, 전류밀도, 외부 양자 효율, 발광효율 특성을 측정하였다. 외부 양자 효율과 발광 효율은 전압이 높아질수록 증가하다가 5∼8 [V]부근에서 급격히 증가하였다가 감소하는 경향을 보여주고 있다. 또한 전자주입 물질이 적층된 세 구조 모두 휘도와 전류밀도 특성은 층의 구조가 증가할수록 효율이 향상 되는 것을 확인하였다. 이것은 각 층에 삽입된 유기물질이 에너지 장벽을 낮추어 정공과 전자의 이동을 용이하게 하여 낮은 전압에서도 정공과 전자의 재결합을 향상시키기 때문으로 사료된다.
During the 20th century, TV, computer, and internet were most contributed inventions to civilizations. 21th century is arriving high capacity, high speed information processing technology. Display devices such as TFT-LCD, PDP, FED and EL has been intensively studied for its application of PC, mobile, digital TV, LCD, PDP panel. In this paper, we investigated electrical properties of Organic Light Emitting Diodes and main work has been focused on the studies of electron injection layer materials. Also, to investigate the property of materials, roughness of surface was measured with Atomic Force Microscopy (AFM). We fabricated OLED device of two layered structures (ITO/TPD/Alq3/Al), three layered structures (ITO/TPD/Alq3/Li2CO3, Na2CO3, Cs2CO3/Al), four layered structures (ITO/TPD/Alq3/BCP/Li2CO3, Na2CO3, Cs2CO3/Al), and five layered structures (ITO/AF/TPD/Alq3/BCP/Li2CO3, Na2CO3, Cs2CO3/Al) to acquire enhanced electrical properties of OLED by incorporating electron injection materials. Using of different multilayered structure, we analyzed electrical/optical properties using three, four, and five layered structures. When voltage reached at 5∼8 [V], External quantum efficiency and Luminous efficiency was sharply increased, consequently, the property of three structures using electron injection materials was enhanced. It show because each layer organic materials lowered energy barrier, electron is easier to move. Therefore, recombination of hole and electron can be improved into low voltage.
목차
제 1 장 서 론제 2 장 관계 이론제 1 절 유기 발광 다이오드의 발광 메커니즘제 2 절 유기 발광 다이오드의 구조제 3 절 유기 발광 다이오드의 J-V 특성제 4 절 유기 발광 다이오드의 발광 효율제 3 장 실 험제 1 절 ITO 처리제 2 절 사용 물질제 1 항 사용 유기 물질(Organic Materials)제 2 항 음극제 3 절 진공 열 증착제 4 절 측정제 1 항 Atomic force microscope(AFM) 측정제 2 항 전기적 특성 측정제 4 장 실험 결과 및 고찰제 1 절 물질의 AFM 특성제 1 항 정공 주입 물질(AF)제 2 항 정공 수송 물질(TPD)제 3 항 발광 물질(Alq3)제 4 항 전자 수송 물질(BCP)제 5 항 전자 주입 물질 (Li2CO3, Na2CO3, Cs2CO3)제 2 절 전기적 특성제 1 항 2층 구조의 전기적 특성제 2 항 3층 구조의 전기적 특성제 3 항 4층 구조의 전기적 특성제 4 항 5층 구조의 전기적 특성제 5 장 결 론참고문헌