지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학위논문
- 저자정보
- 지도교수
- 김형종
- 발행연도
- 2013
- 저작권
- 강원대학교 논문은 저작권에 의해 보호받습니다.
이용수5
이 논문의 연구 히스토리 (2)
- 이 논문의 후속연구가 궁금하신가요?
- 연관 학술논문 또는 학술발표를 통해 보다 발전된 연구결과를 확인하실 수 있습니다.
- 이 논문의 연구 히스토리 확인하기
초록· 키워드
오류제보하기
In this study the material properties of SABC 1470 by heat treatment was measured based on the uniaxial tensile test, Vickers hardness test and Charpy impact test. These material properties were compared with Hat-type by hot press forming. In addition, the 3 point bending test was conducted measure behavior under bending loading. Also, the those test results were comparative analysis using the finite element analysis method. The comparison result showed that the tensile strength was slightly larger for Hat-type than SABC1470 by heat treatment. However, the Vickers hardness and impact value were not larger for Hat-type than SABC1470 by heat treatment. The results obtained through the 3 point bending test could not compared between Hat-type and SABC1470 because Hat-type parts were not enough for bending test. Instead of the material properties of bending results were compared through FE analysis .
목차
1.서론1.1 연구 배경 및 목적 ·········································11.2 연구 내용 ·············································32.기본물성 시험2.1 단축인장시험 ············································42.2 샤르피 충격시험 ··········································202.3 비커스 경도시험 ·········································253. 3점 굽힘시험 및 유한요소해석3.1 3점 굽힘시험 ···········································313.2 유한요소해석 ···········································414. 결론 ·················································45
최근 본 자료
댓글(0)
0