메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학위논문
저자정보

이석정 (충남대학교, 忠南大學校 大學院)

지도교수
廉京煥
발행연도
2013
저작권
충남대학교 논문은 저작권에 의해 보호받습니다.

이용수1

표지
AI에게 요청하기
추천
검색

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
In this paper, we present a design of a 5th order Chebyshev interdigital band-pass filter using inverter and susceptance slope parameter values obtained from EM simulated multi-port Y-parameters. The shifted length of the resonator is determined when the frequency of the transmission zero is separated far away from the center frequency. For the initial dimensions of the interdigital filter, the filter is decomposed into the individual resonators, and the dimensions are obtained using EM simulation of the decomposed resonators. However, the interdigital filter with the dimensions determined form the EM simulation of the decomposed resonators shows slightly distorted response from the desired frequency response due to the coupling between non-adjacent resonators. To obtain a EM simulation dataset, EM simulation for this filter is carried out by parameter sweep with constant ratio for the initial values. In this dataset, it is determined the final values for the filter by optimization. The fabricated filter by PCB show a upper-shift of center frequency of about 105 MHz, which was caused by permittivity changed and tolerance of fabrication.

목차

제 1 장. 서 론 1
1.1. 연구 배경 1
1.2. 연구 내용 4
제 2 장. 개별공진기의 EM 시뮬레이션을 통한 여파기 설계 5
2.1. 설계 방법 개요 5
2.2. 무 손실 2.포트 회로의 인버터 등가 모델 7
2.2.1. 인버터 등가 모델 유도 7
2.2.2. 변위된 인터디지털 여파기 10
2.2.3. 여파기 설계 이론 12
2.3. 개별공진기의 파라미터 추출 및 여파기 설계 16
2.3.1. 입력 공진기 설계 16
2.3.2. 외곽공진기 설계 20
2.3.3. 중앙공진기 설계 23
2.3.4. 여파기의 초기 주파수 응답특성 26
제 3 장. 다중 포트 Y.파라미터를 이용한 여파기의 재설계 29
3.1. 다중 포트 EM 파라미터 스윕 29
3.1.1. 다중 포트 EM 파라미터 스윕 29
3.1.2. 데이터세트를 이용한 다중 포트 파라미터 스윕 31
3.2. 최적화를 통한 설계 파라미터의 조정 34
제 4 장. 제작 및 측정결과 38
4.1. 제작 환경을 고려한 여파기의 주파수 응답특성 38
4.1.1. Via의 외벽 설정 39
4.1.2. 유전율의 변경 41
4.1.3. 도체의 변경 43
4.1.4. 커버 제거 44
4.1.5. 도체 두께 변경 45
4.1.6. 로스 탄젠트 변경 46
4.1.7. 여파기 설계 파라미터의 제작 공차 고려 47
4.1.8. Sonnet simulation 48
4.2. 여파기 제작 및 측정결과 50
4.2.1. 여파기 제작 50
4.2.2. 링 공진기 제작 53
제 5 장. 결 론 55
참고문헌 56
Abstract 58

최근 본 자료

전체보기

댓글(0)

0