메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학위논문
저자정보

변성욱 (대구가톨릭대학교, 대구가톨릭대학교 대학원)

지도교수
최상준
발행연도
2014
저작권
대구가톨릭대학교 논문은 저작권에 의해 보호받습니다.

이용수5

표지
AI에게 요청하기
추천
검색

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
Under the recently revised sampling and analytical method, a polyvinyl chloride (PVC) membrane filter is included in sampling media while the National Institute for Occupational Safety and Health (NIOSH) reference method 7300 suggests that the PVC membrane filter may be used for metal sampling and analysis. In this study, spiked samples were prepared for chromium, iron, and manganese, pretreated with acid extraction, hot plate ashing, and microwave digestion, and analyzed with the inductively coupled plasma optical emission spectrometer (ICP-OES). Three pretreatment methods were evaluated for the recovery rate, accuracy, and precision for each element. In addition, results for manganese were comparatively assessed by pretreatment, filter, and instrument. The mean recovery rate results all satisfied the NIOSH recommended criterion of 90% or higher for the acid extraction (chromium 103.5%, iron 100%, manganese 102.4%), hot plate ashing (chromium 101.6%, iron 100.4%, manganese 103.5%), and mircowave digestion (chromium 100.6%, 99.0%, 98.8%). Results for spiked samples were better for a mixed cellulose ester (MCE) membrane filter than a PVC membrane filter. ANOVA was conducted for PVC membrane filter results by 3 pretreatment method and mean recovery rate, and a significant difference was noted for chromium and manganese, except for iron. Manganese samples were prepared on a MCE membrane filter and a PVC membrane filter, pretreated with 3 methods, and analyzed with atomic absorption spectrophotometer (AAS) and ICP. While the MCE membrane filter exhibited no significant difference between AAS and ICP, a significant difference was found between AAS and ICP for the PVC membrane filter.

목차

Ⅰ. 서 론 1
1. 연구 배경 1
2. 연구 목적 3
Ⅱ. 연구 방법 4
1. 대상 4
2. 질의응답조사 4
3. 첨가시료 제조 4
4. 전처리 방법 6
4.1. 질산과 염산을 이용한 추출법 6
4.2. NIOSH 7300 방법에 의한 hot plate 회화 전처리 법 6
4.3. microwave oven을 이용한 전처리 법 7
5. 자료 분석 8
Ⅲ. 결 과 10
1. PVC 막 여과지 사용실태에 관한 조사 10
2. PVC 막 여과지 첨가시료를 이용한 회수율 및 정확도, 정밀도 11
3. 망간에 대한 각각의 조건에 따른 회수율 및 정확도, 정밀도 19
Ⅳ. 고 찰 28
Ⅴ. 결 론 32
참고 문헌 34

최근 본 자료

전체보기

댓글(0)

0