메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학위논문
저자정보

서미희 (부산대학교, 부산대학교 대학원)

지도교수
정원섭
발행연도
2014
저작권
부산대학교 논문은 저작권에 의해 보호받습니다.

이용수5

표지
AI에게 요청하기
추천
검색

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
The aim of the present study was to improve the radiative heat dissipation of aluminum alloy, Al 1050. Resin/CuO coating and Cu/CuO composite plating were applied on aluminum alloy to improve the radiative heat dissipation. Resin/CuO coating was made using thermosetting silicon resin and Cu/CuO composite plating was made in pyrophosphate copper plating bath. Radiant heat flux(W/m2) was measured by self-produced radiant heat measurement device to compare each specimen. The cross section of specimen and chemical bonding of surface were analyzed by FE-SEM, XPS and FT-IR. As a result, radiant heat of Resin/CuO coating was higher than Cu/CuO composite plating due to the adhesion with aluminum plate and the difference in chemical bonding. But, Both of them were higher than aluminum alloy. In order to confirm the result of experiment, aluminum plate, Resin/CuO coating and Cu/CuO composite plating sample were applied LED and measured the LED temperature. As a result, LED temperature of samples were matched previous results and confirmed coated samples were lower about 10 degrees than the aluminum alloy.

목차

제 1 장 서 론 1
제 2 장 이론적 배경 3
2.1 열전달 기구 3
2.1.1 대류 3
2.1.2 전도 6
2.1.3 복사 10
2.2 분석기구 19
2.2.1 방열량 측정기기 19
2.2.2 FT-IR 분광법 22
제 3 장 실험 방법 31
3.1 시편준비 31
3.2 표면처리방법 33
3.2.1 Resin/CuO 코팅 33
3,2.2 Cu/CuO 복합도금 33
3.3 방열량 측정 36
3.3.1 방열량 측정기기 36
3.3.2 LED, 열화상카메라 36
3.4 복사방열 코팅층 특성 평가 38
3.4.1 XPS 분석 38
3.4.2 FT-IR 분광분석 38
제 4 장 실험 결과 및 고찰 39
4.1 방열량 비교 39
4.2 복사방열 코팅층 특성 평가 45
4.2.1 FE-SEM 45
4.2.2 XPS 분석 47
4.2.3 FT-IR 분광분석 49
제 5 장 결 론 52
참고 문헌 53
Abstract 54

최근 본 자료

전체보기

댓글(0)

0