메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학위논문
저자정보

이정열 (공주대학교, 공주대학교 대학원)

지도교수
김기동
발행연도
2016
저작권
공주대학교 논문은 저작권에 의해 보호받습니다.

이용수0

표지
AI에게 요청하기
추천
검색

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
Stress-ribbon bridges are structures which resist to the majority of external forces with the axial force of the post-tensioned bridge deck produced by installing a very thin concrete deck on cables having a specific sag and by introducing post-tensioning force to it. Construction joints, which are produced when the precast concrete segmental decks are connected, cannot adequately transfer the compressive force due to the influence of the cold joint. To compensate for the insufficient compression forces, shear-studs are provided in the longitudinal cast-in-place concrete of a deck. However, the exact value of compression forces occurred at the construction joints cannot be easily determined, which leads to the difficulty in determining the required strength of the shear studs and the high safety factor used in the design of shear studs.
Beam specimens are designed such that a flexural compressive failure occurs, ensuring that the compressive behavior is very similar to that of stress-ribbon bridges. A relationship between shear stud strength and the maximum compression force at the occurrence of slip in the longitudinal cast-in-place concrete are investigated. The relationship appears to be parabolic. From the comparison of the suggested parabolic relationship and the actural design applied to a stress-ribbon bridge, it was verified that the suggested relationship can be applicable to the reasonable design of shear studs.

목차

1. 서 론 1
1.1. 연구의 배경 및 목적 1
1.2. 기존 연구 고찰 5
2. 스트레스 리본 교량의 프리캐스트 세그먼트 콘크리트 Deck 연결 12
2.1. 프리캐스트 세그먼트 콘크리트 Deck 연결방식 12
2.2. 전단연결재 설계 23
2.3. RC Joint의 종방향 철근 겹이음 27
2.4. PC 콘크리트 Deck 사용재료 30
2.5. 스트레스 리본 교량의 전단연결재 설계현황 31
3. 보의 휨압축파괴 실험 33
3.1. 실험계획 33
3.1.1. 보 실험체 설계 33
3.1.2. 가력과 내력산정 43
3.2 전단연결재의 압축력 분담비에 따른 보의 휨강도 46
4. 전단연결재 설계 방안 71
4.1. 스트레스 리본 Deck 최대압축응력-소요전단강도 관계를 이용한 전단연결재 설계 71
4.2. Construction Joint 경계면이 분담하는 압축력을 이용한 전단연결재 설계 76
5. 결론 85
부록A 86
참고문헌 137
ABSTRACT 138

최근 본 자료

전체보기

댓글(0)

0