지르코니아의 자연스러운 색조 재현을 위해 여러 종류의 착색제와 유색 지르코니아 블록이 개발되고 있다. 자연치와의 색조 조화를 위해 유색 투명 지르코니아가 출시되었고 색조 부여가 유색 투명 지르코니아 블록의 성질에 미치는 영향에 대한 연구가 부족한 실정이다. 지르코니아의 성질이 변화되지 않는 범위에서 자연치와 조화로운 색조를 부여할 수 있는 유색 투명 지르코니아 블록을 연구하고자 한다. 본 연구에서는 유색 투명 지르코니아 블록을 이용하여 시편을 2 종의 착색제로 0, 2, 4회로 나누어 색조를 부여하고 1,450℃와 1,550℃로 소결하여 만능시험기로 굴곡강도의 변화를 측정하고 색조측정기로 색조 변화를 측정하여 아래와 같은 결론을 얻었다.
1. 유색 투명 지르코니아로 제작한 시편의 착색제 종류, 착색 횟수, 소결온도에 따른 굴곡강도 실험에서는 130.02 ∼ 112.05 kgf의 값을 보였으며, 시편군 간에는 의미 있는 차이를 보이지 않았다.
2. 지르코니아 블록의 착색 횟수에 따른 구분 비교에서는 124.70 ∼ 118.58 kgf의 굴곡강도 값을 보였으며, 2회 착색군이 4회 착색군보다 높은 굴곡강도를 보였으며 그 차이는 매우 적어 의미 있는 차이를 보이지 않았다.
3. 소결온도에 따른 구분 비교에서는 착색제간 굴곡강도 측정에서도 제조사가 제시한 1450℃ 소결군이 일반적인 지르코니아 블록 소결온도 1.550℃군에 비하여 다소 높은 굴곡강도를 보였으나, 가장 차이 나는 대조군에서도 13.05 kgf 정도로 차이가 적었다.
4. 착색제에 따른 구분 비교에서는 Ko’s liquid와 Kiss liquid 2 종 착색제 간의 산도 차이가 있음에도 굴곡강도 값이 3.46 kgf로 매우 적어 의미 있는 차이를 보이지 않았다.
5. 유색 투명 지르코니아 블록 시편의 착색제 종류, 착색 횟수, 소결온도에 따른 색조 변화는 착색 2회에서 4회로 증가함에 따라 A2에서 A3.5, A4로 변하여 뚜렷한 색조 차이가 있었다. 소결온도와 착색제 간에는 색조 변화를 보이지 않았다.
In order for zirconia’s tone of color to be reproduced naturally, various coloring agents and preshaded zirconia block are now being developed. To be in harmony with teeth, preshaded zirconia has been already released, however, there are insufficient studies about how coloring has influence on character of preshaded zirconia,. Therefore, this study will focus on the preshaded zirconia block whose feature is to allow color to be permeated without changing zirconia’s properties. This study obtained the following results through the process where speciment is divided 0, 2, 4 times with two different coloring agents and is granted a tone of color using preshaded zirconia block. Then, sintered it in 1,450℃ and 1,550℃ each and measured the level of shade with Dental spectromete, Flexural strength with universal testing machine and analyse them.
1. On the flexural strength adapting the kind, the frequency, and sintering temperature of experimental unit to colored-transparent zirconia, each group shows 130.02-112.05kgf. This result indicates that there is not a meaningful difference of the Flexural Strength between each group.
2. On the comparison of the flexural strength depending on the frequency of a coloring agent, each group shows 124.70 - 118.58kgf. Despite the fact that the experimental unit which is colored two times has stronger flexural strength than that colored four times, it is hard to say that there is a huge difference between each group.
3. Regarding the flexural strength of sintering temperature, the experimental unit which is sintered at 1,450℃ shows slightly strong flexural strength than that sintered at 1,550℃. Considering the fact that the biggest difference between each group is 13.05 kgf, it can be said that there is little difference of the flexural strength.
4. On the coloring agent, Ko’s liquid and Kiss liquid have little difference of the flexural strength although they have different level of acidity.
5. As the frequency of coloring agent increases from two times to four times, colored-transparent zirconia changed from A2 to A3.5, and A4. However, there is no color change between sintering temperature and a coloring agent.
I. 서 론 1II. 이론적 배경 41. 치과용 지르코니아 42. 치과용 지르코니아 색조 83. 표색계 10III. 연구방법 121. 실험재료 및 시편제작 13Ⅳ. 실험 결과 211. 굴곡강도 분석 222. 착색제 침지 횟수에 따른 굴곡강도 비교 233. 소결온도에 따른 굴곡강도 비교 244. 착색제 종류에 따른 굴곡강도 비교 255. 색조측정 비교 27V. 고 찰 28Ⅵ. 결 론 32참고문헌 33영문초록(Abstract) 37