메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학위논문
저자정보

이광표 (전북대학교, 전북대학교 일반대학원)

지도교수
박찬우
발행연도
2017
저작권
전북대학교 논문은 저작권에 의해 보호받습니다.

이용수13

표지
AI에게 요청하기
추천
검색

이 논문의 연구 히스토리 (5)

초록· 키워드

오류제보하기
The purpose of this study is to apply cooling system of inverter used in turbo chiller to water cooling system. The existing air cooling system has a disadvantage in that it has a large volume that affects the heat sink depending on the use environment. To overcome these drawbacks, this study investigated the cooling system of water cooled inverter. ANSYS CFX16.1 was used to optimize the cooling system. The inlet temperature of the cooling water was 30 ° C, and the turbulent flow model of the cooling water flow was the k-ε model. Experimental conditions were 30 ℃ for cooling water inlet temperature, 300, 500, 800, 1500W for heat input. Optimized water-cooled winches were directly machined using a CNC machine tool and the experimental and CFX analysis data were compared. The average surface temperature of the heat sink was about 2.2% higher than that of the water-cooled cooling system when the heat input was 1500 W and the mass flow rate of the cooling fluid was 0.05 kg / s. Cooling heat showed that the cooling heat of the water cooling system was about 79.3% higher than that of the air cooling system.

목차

목차 ⅰ
Abstract ⅱ
List of Tables ⅴ
List of Figures ⅵ
제1장 서론 1
1.1 연구 목적 1
제2장 이론적인 배경 5
2.1 터보냉동기의 구조 5
2.2 인버터의 구조 및 원리 8
제3장 최적화 및 해석 11
3.1 공랭식 히트싱크 해석 11
3.2 지배방정식 및 경계조건 13
3.3 공랭식 히트싱크 해석 결과 16
3.4 데이터 처리 관계식 17
3.5 수냉식 히트싱크 유로설계 및 최적화 19
제4장 실험장치 및 방법 37
4.1 실험장치 37
4.1.1 공랭식 히트싱크 37
4.1.2 수냉식 히트싱크 39
4.1.2.1 수냉식 히트싱크 가공 39
4.1.2.2 수냉식 히트싱크 실험 41
제5장 실험결과 및 고찰 44
5.1 공랭식 냉각 시스템 실험 결과 44
5.2 수냉식 냉각 시스템 실험 결과 47
5.3 냉각 시스템 실험 결과 53
5.4 실험 고찰 56
제6장 맺음말 57
참고문헌 59

최근 본 자료

전체보기

댓글(0)

0