지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학위논문
- 저자정보
- 지도교수
- 신우철
- 발행연도
- 2018
- 저작권
- 대전대학교 논문은 저작권에 의해 보호받습니다.
이용수9
이 논문의 연구 히스토리 (2)
- 이 논문의 후속연구가 궁금하신가요?
- 연관 학술논문 또는 학술발표를 통해 보다 발전된 연구결과를 확인하실 수 있습니다.
- 이 논문의 연구 히스토리 확인하기
초록· 키워드
오류제보하기
The types of installation of the photovoltaic system applied to domestic residential buildings are classified as follows: Mounted modules with air circulation, semi-integrated modules with air duct behind, integrated modules with fully insulated back. In order to study generation characteristics of PV system, we verified the validity of interpretation program based on long-term measurement data of demonstration house installed in BAPV form and also analyzed the generation characteristics and performance of each installation type. The results are as follows. First, the
RMSE of amount of generation and simulation according to annual daily insolation of demonstration system located in Daejeon was 0.98kWh and the range of relative error of monthly power generation was -5.8 to 3.1. Second, the average annual PR of mounted modules was 82%, semi-integrated modules 76.1% and integrated modules 71.9%. This differences were attributed to temperature loss. Third, the range of operating temperature of annual hourly photovoltaic modules was ?6.5 to 61.0℃ for mounted modules, ?6.0~73.9℃ for semi-integrated modules and ?5.5 to 88.9℃ for integrated modules. The temperature loss of each installation type was ?14.0 to 16.1%, ?13.8 to 21.9%, and ?13.6 to 28.5%, respectively.
RMSE of amount of generation and simulation according to annual daily insolation of demonstration system located in Daejeon was 0.98kWh and the range of relative error of monthly power generation was -5.8 to 3.1. Second, the average annual PR of mounted modules was 82%, semi-integrated modules 76.1% and integrated modules 71.9%. This differences were attributed to temperature loss. Third, the range of operating temperature of annual hourly photovoltaic modules was ?6.5 to 61.0℃ for mounted modules, ?6.0~73.9℃ for semi-integrated modules and ?5.5 to 88.9℃ for integrated modules. The temperature loss of each installation type was ?14.0 to 16.1%, ?13.8 to 21.9%, and ?13.6 to 28.5%, respectively.
목차
Ⅰ. 서 론 011. 이론적 배경 및 연구 목적 012. 연구 방법 033. 선행연구 고찰 05Ⅱ. 태양광발전시스템 설치 유형 061. 주거용 건물 태양광발전시스템 설치 유형 06Ⅲ. 실증주택 개요 081. 실증주택 위치 082. 실증주택 태양광발전시스템 설치 현황 091) 태양광모듈 & 인버터 설치 현황 092) 모니터링 설치 현황 11Ⅳ. 태양광발전시스템 분석 121. 실증주택 태양광발전시스템 분석 121) 실측데이터 통한 태양광발전시스템 분석 122) 시뮬레이션 프로그램 소개 133) 기상데이터 선정 144) 시뮬레이션 프로그램 타당성 분석 142. 실증주택 태양광발전시스템 성능 분석 171) 태양광발전시스템 손실 분석 172) 설치유형에 따른 태양광발전시스템 성능 분석 213) 국내외 모듈 후면 환기 사례 24Ⅴ. 결 론 25참 고 문 헌 26영 문 초 록 28
최근 본 자료
댓글(0)
0